CUSMA Rules of Origin: Qualifying Your Goods
CUSMA rules of origin decide whether goods move duty-free within North America, and since 2025 they have also decided whether Canadian goods escape some US tariffs. Exporters need accurate classifications, RVC calculations, certifications and records that survive verification by the CBSA or US Customs.

Key takeaways
- Goods qualify if wholly obtained, made from originating materials, or meeting a product-specific rule.
- Most product-specific rules use tariff shift, regional value content or both.
- Passenger vehicles require 75% RVC and 40% labour value content at USD 16/hour wages.
- Certifications need minimum data elements but no prescribed form; blankets cover up to 12 months.
- Importers must correct incorrect origin declarations within 90 days (Customs Act s. 32.2).
- US tariff measures have often turned on whether goods qualify under CUSMA.
CUSMA rules of origin explained
CUSMA rules of origin decide whether a good is "originating" under the Canada–United States–Mexico Agreement and therefore entitled to preferential, usually duty-free, treatment when imported into another CUSMA country. A good can originate in one of three main ways: it is wholly obtained or produced entirely in the territory of one or more parties (for example, minerals mined in Canada); it is produced entirely from originating materials; or it is produced using non-originating materials that satisfy the product-specific rule for that good, usually a change in tariff classification, a regional value content (RVC) threshold, or both. Simple assembly, repackaging and other minimal operations do not confer origin.

For Canadian exporters and importers, origin has moved from a back-office customs question to a board-level issue. Since 2025, US tariff measures on Canadian goods have repeatedly distinguished between goods that qualify under CUSMA and those that do not, so the ability to prove origin can determine whether a shipment pays a tariff at all. This insight explains how goods qualify, the special automotive rules, certification, record-keeping and verification. It is general information, not legal advice.
Tariff shift rules
Most product-specific rules in CUSMA Annex 4-B use a change in tariff classification ("tariff shift"). The rule specifies that each non-originating material must undergo a particular change in Harmonized System classification as a result of production in the CUSMA region, at the chapter (two-digit), heading (four-digit) or subheading (six-digit) level. If a manufacturer in Ontario makes furniture from imported lumber and hardware, the non-originating inputs must be classified in different headings from the finished furniture, as the rule requires.
Correct classification of both the finished good and every non-originating input is therefore the foundation of any origin determination. A misclassified input can make an otherwise qualifying good non-originating. Our insight on tariff classification and advance rulings explains how classification is determined in Canada.
De minimis
CUSMA allows a limited amount of non-originating material that does not satisfy the tariff shift to be disregarded, generally where its value does not exceed 10 per cent of the good's transaction value or total cost, subject to exceptions for certain agricultural and textile products. De minimis can rescue a good that narrowly fails a tariff shift rule, but it must be calculated and documented.
Regional value content
Some rules require, or offer as an alternative, a minimum regional value content. CUSMA provides two methods:
- Transaction value method: RVC = (transaction value − value of non-originating materials) ÷ transaction value × 100. The usual threshold under this method is 60 per cent.
- Net cost method: RVC = (net cost − value of non-originating materials) ÷ net cost × 100. The usual threshold under this method is 50 per cent. Net cost excludes certain costs such as sales promotion, royalties, shipping and non-allowable interest.
The transaction value method is simpler but unavailable in some cases, including where there is no transaction value or for certain automotive goods. Producers often need cost accounting support to calculate net cost reliably, and should consider whether they can use tracing, averaging or intermediate-material designations permitted by the agreement.
| Qualification route | What must be shown | Typical evidence |
|---|---|---|
| Wholly obtained | Good produced entirely in the CUSMA region from natural resources there | Production and extraction records |
| Entirely from originating materials | All materials are themselves originating | Supplier certifications of origin |
| Tariff shift | Each non-originating input undergoes the required classification change | Bill of materials with HS codes and origin of each input |
| RVC | Regional value meets the threshold under the applicable method | Cost accounting, invoices, net cost calculations |
Automotive rules: RVC and labour value content
The automotive rules are the most demanding. For passenger vehicles and light trucks, CUSMA requires a 75 per cent RVC under the net cost method, phased in over the agreement's early years, with separate RVC requirements for core parts, principal parts and complementary parts.
CUSMA also introduced a labour value content (LVC) requirement: a specified share of the vehicle's value (40 per cent for passenger vehicles, 45 per cent for light trucks) must come from high-wage material and manufacturing expenditures, defined by reference to production wages of at least USD 16 per hour, plus certain technology and assembly expenditures. Vehicle producers must also show that at least 70 per cent of their steel and aluminum purchases originate in North America.
These rules drive sourcing decisions across Canada's parts sector. Suppliers are routinely asked for detailed information on content, wages and steel origin so that vehicle producers can certify compliance. Contract terms should allocate responsibility for accurate data and the consequences of errors.
Certification of origin
CUSMA does not prescribe a mandatory form. A certification of origin may be provided on an invoice or other document and must contain the minimum data elements listed in the agreement, including the certifier, exporter, producer and importer details, a description and HS classification of the good, the origin criterion, a blanket period if applicable, and an authorized signature and date. Depending on the party, the certification may be completed by the producer, exporter or importer. A blanket certification can cover multiple shipments of identical goods for up to 12 months.
Under the Canadian Customs Act, an importer that claims preferential treatment and later has reason to believe the declaration of origin is incorrect must, within 90 days, correct the declaration and pay any duties and interest owing (s. 32.2(1)). Timely corrections avoid penalties under the Administrative Monetary Penalty System.
Do not certify origin on the basis of a supplier's assurance alone. Obtain written certifications from suppliers for originating inputs, keep a bill of materials with HS codes and values for every non-originating input, and re-run the analysis when suppliers, prices or product designs change.
Record-keeping and verifications
CUSMA requires importers, exporters and producers that certify origin to keep the supporting records for at least five years, and Canadian regulations impose their own retention requirements on importers. Records include purchase and production records, cost data, supplier certifications and inventory management records if averaging or inventory methods are used.
Customs administrations verify origin through questionnaires, letters and site visits to producers, and may deny preferential treatment if the certifier fails to respond or cannot substantiate the claim. In Canada, the CBSA conducts verifications under the Customs Act and may re-determine origin, with rights of review and appeal to the Canadian International Trade Tribunal. US Customs and Border Protection conducts its own verifications of Canadian goods imported into the United States. A failed verification can affect every shipment covered by a blanket certification, so the financial exposure can be large.
Why CUSMA rules of origin now determine US tariff exposure
US tariff actions since 2025 have made origin decisive. At various points, US measures have exempted goods that qualify for CUSMA preferential treatment, or applied different rates to them, while non-qualifying Canadian goods paid the additional duty. Section 232 measures on automobiles and parts have also used US content as a basis for relief. In February 2026, the US Supreme Court held in Learning Resources, Inc. v. Trump that the International Emergency Economic Powers Act does not authorize tariffs, but other tariff measures remain and new ones have been imposed under other statutes. See our insight on US tariffs on Canadian goods.
The practical lesson is that many Canadian exporters who previously did not bother claiming CUSMA treatment, because the most-favoured-nation US rate was already zero, now need robust origin determinations. Claiming preference requires the same discipline as any customs declaration: an incorrect claim exposes the importer to duties, interest and penalties on verification.
Accumulation and production in several countries
CUSMA allows accumulation: production carried out in Canada, the United States and Mexico can be combined when determining whether a good originates. A component made in Mexico from non-originating steel, then incorporated into an assembly in Ontario, may count toward the Ontario producer's regional value content even if the component itself is not originating, provided records show the value added in each country. Accumulation is valuable for integrated North American supply chains, but it depends on suppliers providing detailed data, not just yes-or-no origin statements.
Production also has to be more than cosmetic. Operations such as dilution with water, simple packaging, sorting, labelling or minor assembly do not by themselves make a good originating, even if a tariff shift seems to occur on paper.
Common mistakes in applying CUSMA rules of origin
- Assuming "made in Canada" means originating. Marking rules and CUSMA rules of origin are different tests; a good can be marked as a product of Canada and still fail the applicable rule.
- Using the wrong rule. The product-specific rule depends on the HS classification of the finished good; a classification error leads to applying the wrong test.
- Stale analyses. Changes in suppliers, input prices or exchange rates can push an RVC calculation below the threshold.
- Weak supplier evidence. Supplier declarations without supporting data rarely withstand verification.
- Ignoring the automotive specifics. Core parts, labour value content and steel and aluminum purchase requirements are separate tests that must each be met.
Companies that apply CUSMA rules of origin across many products should centralize the analysis, document assumptions, and assign a responsible owner for each product family. Advance rulings from the CBSA under s. 43.1 of the Customs Act can provide certainty for origin and classification before goods are imported, and are reviewable within 90 days.
Origin planning and supply chain decisions
- Identify which products are most exposed to tariffs that depend on CUSMA qualification, ranked by export value and margin.
- Run origin analyses for each product family and identify the inputs that cause failure.
- Assess sourcing alternatives in the CUSMA region and their cost relative to tariff savings, including the time needed to qualify new suppliers.
- Consider advance rulings from the CBSA, or rulings from US authorities, for high-value or uncertain products where a wrong answer would be costly.
- Build origin representations, data-sharing obligations and indemnities into supply contracts; see our insight on tariff risk in purchase agreements.
- Monitor the CUSMA joint review, since changes to rules of origin are among the issues in play.
How TRW & Co helps
We advise Canadian exporters, importers and foreign suppliers on CUSMA rules of origin and the tariff consequences of origin. Our work includes product-specific origin analyses, RVC and LVC calculations with finance teams, certification and record-keeping programs, supplier data requirements, voluntary corrections under s. 32.2 of the Customs Act, and responses to CBSA and US origin verifications. We also help businesses assess sourcing changes and contract terms in light of tariff exposure. Where licensed customs brokers or counsel admitted in a particular jurisdiction are required, we coordinate with them. See our tariffs, CUSMA and customs page or our United States desk page, or contact us.
Frequently asked questions
How does a good qualify under CUSMA rules of origin?
It must be wholly obtained or produced in the CUSMA region, produced entirely from originating materials, or produced from non-originating materials that satisfy the product-specific rule in Annex 4-B, typically a tariff shift, a regional value content threshold or both. Minimal operations such as simple assembly or repacking do not confer origin.
What is regional value content?
It measures the share of a good's value that comes from the CUSMA region. Under the transaction value method the usual threshold is 60 per cent; under the net cost method it is usually 50 per cent. Some goods, including many automotive goods, must use the net cost method.
Is there a mandatory CUSMA certificate of origin form?
No. CUSMA requires a certification containing specified minimum data elements, which may appear on an invoice or other document. It may cover a single shipment or, as a blanket certification, multiple shipments of identical goods for up to 12 months.
What if I discover an origin claim was wrong?
Under s. 32.2 of the Customs Act, an importer must correct the declaration of origin within 90 days of having reason to believe it is incorrect and pay duties and interest owing. Prompt correction reduces the risk of penalties.
Why does origin matter for US tariffs?
Several US tariff measures since 2025 have exempted or treated differently goods that qualify for CUSMA preference, so proving origin can determine whether a Canadian export pays additional duty. Exporters who never claimed CUSMA because the US rate was zero now often need full origin analyses.
Sources
General information only, not legal advice. References to statutes, courts and authorities describe published law and practice at the date shown.


