Skip to content
Corporate & M&A

Representations and Warranties Insurance in Canadian Deals

Representations and warranties insurance lets a buyer recover for breaches of a seller's promises from an insurer instead of the seller. This guide explains how buy-side policies work on Canadian deals, what they exclude, how underwriting runs and how to bring a claim.

Deal team reviewing a representations and warranties insurance policy alongside a share purchase agreement

Key takeaways

  • Buy-side policies let sellers exit cleanly while buyers keep a remedy for unknown breaches.
  • Retention, drop-down and policy limit drive the economics; excess layers add capacity.
  • Known breaches, forward-looking statements, pension deficits and tariff changes are typically excluded.
  • The underwriting call tests the depth of the buyer's diligence; thin diligence means exclusions.
  • The purchase agreement must be drafted to match the policy's definitions and exclusions.
  • Prompt notice and good diligence records are the keys to a successful claim.

What representations and warranties insurance does on a Canadian deal

Representations and warranties insurance (often called R&W insurance or RWI) is a policy that pays the insured for loss caused by a breach of the seller's representations and warranties in a share or asset purchase agreement. On Canadian private deals it is almost always a buy-side policy: the buyer is the insured, the insurer steps into the role a seller indemnity would otherwise play, and the seller can walk away with most of the price and a much smaller escrow, or none at all.

Deal team reviewing a representations and warranties insurance policy alongside a share purchase agreement
Representations and warranties insurance shifts the cost of unknown breaches from the seller's escrow to a third-party insurer.

The product is now a standard tool in Canadian private equity exits, founder sales and auction processes. It does not change the law of contract. The purchase agreement still defines the representations, the disclosure schedules still qualify them, and the policy still responds only to what the agreement says was promised. What changes is who pays when a promise turns out to be untrue, and how the parties negotiate around that risk.

Three features explain most of its appeal. First, a seller, particularly a private equity fund that needs to distribute proceeds, can achieve a "clean exit". Second, a buyer that wants to keep working with the founders after closing does not have to sue them to recover a loss. Third, in a competitive auction a bidder that offers to rely on representations and warranties insurance instead of a large holdback can make its bid look stronger without accepting more risk.

Retention, policy limits and the drop-down

Every policy has a retention, the deductible the insured must absorb before the insurer pays. Retentions are usually expressed as a percentage of enterprise value and have trended downward as the market has matured. The retention is typically split between the buyer and the seller, with the seller's share backed by a modest escrow or a limited indemnity, so that the seller keeps some skin in the game.

Many policies include a "drop-down": after a set period (often twelve months from closing) the retention falls to a lower amount, reflecting the expectation that most breaches are discovered early. The policy limit, the most the insurer will pay, is commonly a fraction of enterprise value, and buyers who want more cover add excess layers from other insurers. Fundamental representations (title, capitalization, authority) and tax representations may carry separate limits up to the purchase price.

TermWhat it meansNegotiating point
RetentionLoss the insured bears before cover attachesSplit between buyer and seller; size of seller escrow
Drop-downRetention falls after a set periodTiming and the reduced amount
Policy limitMaximum insurer payoutPrimary layer plus excess towers
Survival periodsHow long claims can be madeGeneral versus fundamental and tax representations
Materiality scrapeIgnores "material" qualifiers when measuring lossWhether the scrape also applies to breach
Subrogation waiverInsurer cannot pursue the sellerCarve-back for seller fraud

Survival periods in the policy often run longer than those a seller would accept in the agreement, commonly a few years for general representations and longer for fundamental and tax matters. In Ontario, parties to a business agreement may vary or exclude most limitation periods under s. 22 of the Limitations Act, 2002, which is why survival clauses are drafted carefully to say whether they shorten or extend the time to sue rather than merely describe when claims must be notified.

Standard exclusions in representations and warranties insurance

A policy is only as good as its exclusions. Some exclusions are standard across the market; others are deal-specific and emerge from the insurer's review of the buyer's diligence reports. The most important for Canadian buyers are summarized below.

  • Known breaches. Anything the buyer's deal team actually knew about before signing (and often before closing) is excluded. The definition of "knowledge" and whose knowledge counts are heavily negotiated.
  • Forward-looking statements. Projections, budgets and statements about future performance are not insured. Representations about backlog or customer relationships need careful drafting so they speak to existing facts.
  • Purchase price adjustments. Matters dealt with through the working capital or net debt adjustment are excluded to avoid double recovery.
  • Pension underfunding. Deficits in defined benefit plans are usually excluded or sharply limited, so buyers rely on actuarial diligence and a specific indemnity or price reduction.
  • Areas with thin diligence. If diligence on a topic (cybersecurity, environmental, product liability, wage-and-hour compliance) was light, the insurer will carve it out.
  • Fines and penalties that cannot be insured by law, asbestos and other industry-specific risks.

Tariffs have become a live exclusion. With the United States imposing 50% tariffs on CAD 27.6 billion of Canadian goods from 22 August 2026 and Canada responding with counter-tariffs on US goods from 8 September 2026, as set out in Finance Canada's 25 August 2026 release, insurers commonly exclude losses arising from changes in tariff rates, customs classification disputes and origin determinations. Buyers with cross-border supply chains should expect to negotiate a specific indemnity or a price mechanism for that exposure rather than rely on the policy.

How underwriting works

The process usually begins after the buyer has selected a broker and the deal is close to signing. Insurers provide non-binding indications based on the draft agreement and high-level information. The buyer chooses an insurer, pays an underwriting fee and gives the insurer access to the data room and the diligence reports. The core of the process is the underwriting call, a structured session in which the insurer's underwriters question the buyer's legal, financial, tax and other advisers on the scope and findings of their diligence.

Preparation matters. Underwriters look for gaps between the representations given and the diligence actually performed. A representation about compliance with privacy law, for example, will attract an exclusion unless the buyer can show that someone reviewed the target's privacy programme. Advisers should be ready to explain materiality thresholds, sampling methods and any matters flagged as "red" in their reports.

Practical point

Data room material often includes employee and customer personal information. Section 7.2 of the Personal Information Protection and Electronic Documents Act (PIPEDA) lets parties to a prospective business transaction share personal information without consent if a written agreement limits its use and requires its protection and return. Confirm that the insurer and its advisers are covered by an appropriate confidentiality and data-use undertaking before they enter the data room.

After the call, the insurer issues a draft policy with proposed exclusions. Negotiation then focuses on narrowing deal-specific exclusions, the definition of loss, and whether the policy follows the agreement's interpretation provisions. At signing, the buyer binds the policy and pays the premium (or a portion of it), with full payment due at closing. A no-claims declaration is given at signing and again at closing to confirm that the deal team knows of no breach.

Representations and warranties insurance and the purchase agreement indemnity

The purchase agreement must be drafted with the policy in mind. Where the buyer relies on representations and warranties insurance as its primary remedy, the agreement typically provides that the buyer's sole recourse for breaches of non-fundamental representations is the policy, subject to the seller's share of the retention and claims for fraud. Fundamental representations and specific indemnities (for example, for a known tax dispute or a pending lawsuit) may still sit with the seller.

Several drafting points require coordination:

  • Consistency of definitions. Loss, knowledge, materiality and fraud should be defined the same way in the agreement and the policy, or differences should be deliberate.
  • Interim breaches. Breaches that first arise between signing and closing are usually excluded from cover. Buyers should consider walk rights or a specific indemnity for that period, particularly where closing is delayed by a Competition Act or Investment Canada Act review.
  • Subrogation. The insurer waives subrogation against the seller except for fraud. The definition of fraud should be narrow and should identify whose knowledge is attributed to the seller.
  • Disclosure schedules. Because the policy responds to the representations as qualified by the schedules, overly broad general disclosure can quietly erode cover.

Quebec deals raise an additional point: where the agreement is governed by Quebec law, the civil law's rules on good faith and on the seller's warranty of quality can sit alongside the contractual regime. The policy wording should state clearly whether it responds to loss arising under those default rules or only under the express representations.

Running a claim under the policy

When a buyer discovers a potential breach after closing, the first step is the notice provision. Policies require notice within a fixed period after the buyer becomes aware of the matter, and late notice can prejudice recovery. The notice should describe the facts, the representation said to be breached, and an estimate of loss, even if preliminary.

  1. Preserve evidence. Collect the diligence materials, the disclosure schedules and post-closing records that show when the issue was discovered.
  2. Quantify loss. Policies typically cover direct loss and may cover multiplied damages where a breach affects a valuation metric, but only if the policy and agreement do not exclude them.
  3. Engage with the insurer. Most policies give the insurer the right to participate in or control the defence of third-party claims and to request information about first-party losses.
  4. Track the retention. Losses accumulate toward the retention; the buyer may need to aggregate several smaller breaches before cover attaches.
  5. Resolve disputes. Coverage disputes may go to arbitration or court depending on the policy's dispute clause.

Broad representations, such as those on financial statements, compliance with laws, material contracts and tax, tend to generate the most claims because they cover the most ground. Buyers that keep a disciplined record of the diligence process tend to resolve claims faster, because they can show what was and was not known at signing.

When representations and warranties insurance is worth it

Representations and warranties insurance makes most sense on deals large enough to absorb the premium and underwriting costs, where the seller is unwilling or unable to give a meaningful indemnity, or where the buyer values a continuing relationship with management. It is less useful where diligence is limited, where the main risks are known and excluded, or where the key exposures (environmental, pension, tariffs) fall outside cover anyway.

Buyers should compare the net position under each option: the price, the escrow, the scope of cover, and the cost of residual risk that the policy will not cover. In some deals a smaller seller indemnity combined with a targeted specific indemnity gives better protection than a policy with many exclusions. For a broader view of transaction structure, see our guides to mergers and acquisitions in Canada and private equity in Canada, and our analysis of share versus asset purchases and tariff risk in purchase agreements.

How TRW & Co helps

We advise buyers and sellers on Canadian law aspects of insured transactions. For buyers, we draft and negotiate the purchase agreement so that it works with the policy, coordinate legal diligence with the underwriting process, prepare advisers for the underwriting call and review draft policies for exclusions that do not match the risk profile. For sellers, we negotiate the scope of the seller's retention, escrow and fraud carve-outs. After closing, we help buyers prepare and present claims and handle coverage disputes. Where a step requires a lawyer licensed in a Canadian province, we work with local counsel. To discuss an upcoming deal, contact us.

Frequently asked questions

Who buys representations and warranties insurance in Canada?

In most Canadian deals the buyer purchases the policy and is the insured. Seller-side policies exist but are rare. The buyer usually negotiates the cost of the premium as part of the price discussion, and in auctions sellers often ask bidders to confirm they will rely on insurance so the seller can limit its escrow and post-closing exposure.

Does the policy cover breaches the buyer already knew about?

No. Known breaches are a standard exclusion. If members of the buyer's deal team had actual knowledge of a breach before signing, or in some policies before closing, the loss is not covered. Buyers should address known issues through a specific indemnity, a price reduction or a closing condition rather than relying on the policy.

Are tariff-related losses covered?

Usually not. With US tariffs and Canadian counter-tariffs changing during 2026, insurers commonly exclude losses from tariff rate changes, customs classification and origin disputes. Buyers with cross-border supply chains should negotiate a specific indemnity, an escrow or a price mechanism for that exposure.

Can the insurer sue the seller after paying a claim?

Policies generally include a waiver of subrogation against the seller, except where the seller committed fraud. The fraud definition should be drafted narrowly and should identify whose knowledge is attributed to the seller, so that sellers obtain the clean exit the structure is designed to provide.

How long does underwriting take?

Underwriting often runs over one to two weeks once the insurer has access to the data room and diligence reports. It culminates in an underwriting call with the buyer's advisers, followed by negotiation of the draft policy and binding at signing. Delays usually come from incomplete diligence reports rather than the insurer.

Sources

  1. Limitations Act, 2002 (Ontario), s. 22
  2. Personal Information Protection and Electronic Documents Act, s. 7.2
  3. Finance Canada: targeted countermeasures in response to US tariffs (25 August 2026)

General information only, not legal advice. References to statutes, courts and authorities describe published law and practice at the date shown.