Skip to content
Capital Markets & Securities

Canadian Foreign Private Issuers: SEC Reporting Explained

Canadian foreign private issuers enjoy a lighter SEC regime, including MJDS filings on Form 40-F and home-country proxy rules. This guide explains the Rule 3b-4 tests, Form 40-F versus 20-F, SOX obligations, the 2026 Section 16 reporting changes and the SEC's Canadian exemption, and the consequences of losing status.

Annual testing checklist for Canadian foreign private issuers reporting to the SEC

Key takeaways

  • FPI status is tested annually as of the last business day of the second fiscal quarter.
  • An issuer fails only if over 50% of voting securities are held by US residents and a business contacts test is met.
  • Form 40-F requires 12 months of Canadian reporting and a public float of USD 75 million or more.
  • Since 18 March 2026, FPI directors and officers are subject to Section 16(a), with SEC relief for Canadian insiders reporting under NI 55-104.
  • Losing status means US domestic forms from the first day of the next fiscal year.

Why foreign private issuer status matters for Canadian companies

Canadian foreign private issuers are Canadian companies listed or registered in the United States that qualify for the lighter US reporting regime the Securities and Exchange Commission (SEC) offers to non-US issuers. Status as a foreign private issuer (FPI) allows a Canadian company to file annual reports on Form 40-F under the Multijurisdictional Disclosure System (MJDS) or on Form 20-F instead of Forms 10-K, 10-Q and 8-K, to follow home-country proxy rules, and to avoid some US governance requirements. Losing FPI status means moving to the full domestic US regime, with significant cost and compliance consequences.

Annual testing checklist for Canadian foreign private issuers reporting to the SEC
Canadian foreign private issuers must test their status each year under SEC Rule 3b-4.

This note explains the FPI tests, the choice between Form 40-F and Form 20-F, Sarbanes-Oxley (SOX) obligations, the 2026 changes to Section 16 insider reporting for directors and officers of FPIs and the SEC's relief for Canadian insiders, and what happens when status is lost.

The FPI tests under Rule 3b-4

Under Exchange Act Rule 3b-4, any foreign issuer (other than a foreign government) is an FPI unless, as of the last business day of its most recently completed second fiscal quarter, both of the following apply:

  1. Shareholder test. More than 50% of its outstanding voting securities are directly or indirectly held of record by US residents; and
  2. Business contacts test. Any one of the following is true: the majority of its executive officers or directors are US citizens or residents; more than 50% of its assets are located in the United States; or its business is administered principally in the United States.

The shareholder test uses a "look-through" method: the issuer must inquire of brokers, dealers, banks and other nominees in the United States, its jurisdiction of incorporation and its primary trading market about the number of shares held for US-resident customers, and count US-resident beneficial owners reported on beneficial ownership reports. Many Canadian foreign private issuers with heavy US institutional ownership fail the shareholder test, so the business contacts test often decides the outcome for them.

Practical point

Run the FPI analysis well before the end of the second fiscal quarter each year. Moving a few directors' residences, the location of executive decision-making or the location of assets can change the result, but such steps need to be real and documented, not cosmetic.

Form 40-F under MJDS versus Form 20-F

MJDS allows eligible Canadian issuers to satisfy many SEC requirements with their Canadian disclosure documents. Under the Form 40-F general instructions, a registrant may use Form 40-F if it is incorporated or organized under the laws of Canada or a Canadian province or territory, is an FPI or a Crown corporation, has been subject to Canadian periodic reporting requirements for at least 12 calendar months and is in compliance with them, and has a public float of USD 75 million or more (or filed a Form F-9 before 31 December 2012).

FeatureForm 40-F (MJDS)Form 20-F
EligibilityCanadian FPI, 12 months Canadian reporting, public float of USD 75 million or moreAny FPI
Annual report contentCanadian annual disclosure documents (AIF, financial statements, MD&A) wrapped in Form 40-FUS-prescribed content in Form 20-F
Financial statementsIFRS or US GAAP as filed in CanadaIFRS as issued by the IASB without reconciliation, or US GAAP
Interim reportsFurnished on Form 6-K as filed in CanadaFurnished on Form 6-K as required by home-country practice
Typical usersLarger Canadian issuers listed on the TSX and NYSE or NasdaqSmaller Canadian issuers or those not eligible for MJDS

MJDS also covers registration statements for offerings (Forms F-10, F-7, F-8 and F-80 for eligible issuers), so many Canadian foreign private issuers can offer securities in the United States using a Canadian prospectus with limited US additions.

SOX 404, audit attestation and governance

Canadian foreign private issuers registered with the SEC are subject to the Sarbanes-Oxley Act. Management must assess internal control over financial reporting under SOX 404(a), and accelerated and large accelerated filers must also obtain an auditor's attestation under SOX 404(b). Newly public companies and emerging growth companies benefit from transition relief. Chief executive and chief financial officers certify annual reports under SOX 302 and 906. These requirements run in parallel with Canadian certification rules under NI 52-109, and issuers usually build a single control framework satisfying both.

US stock exchange governance rules allow FPIs to follow home-country practice for many requirements, with disclosure of significant differences, but audit committee independence under Rule 10A-3 applies. Canadian corporate governance rules, including NI 52-110 on audit committees and NI 58-101 on governance disclosure, continue to apply in Canada.

Section 16 in 2026: new reporting for FPI insiders and the Canadian exemption

Until 2026, directors and officers of FPIs were exempt from Section 16 of the Exchange Act under Rule 3a12-3(b). That changed with the Holding Foreign Insiders Accountable Act, enacted on 18 December 2025. According to the SEC's fact sheet on its implementing amendments, from 18 March 2026 directors and officers of FPIs with a class of equity securities registered under Section 12 must file Section 16(a) reports electronically and in English. Ten percent holders of FPIs are not covered, and FPI insiders remain exempt from the Section 16(b) short-swing profit rule and the Section 16(c) short-selling prohibition.

On 5 March 2026, the SEC issued an exemptive order relieving directors and officers of FPIs incorporated or organized in specified "qualifying jurisdictions", including Canada, from Section 16(a) filing if they are subject to a "qualifying regulation" and meet the order's conditions. For Canada, the qualifying regulation is NI 55-104 Insider Reporting Requirements and Exemptions, supported by SEDI. In practice, directors and officers of Canadian foreign private issuers who report on SEDI under NI 55-104 can generally rely on the order, but each issuer should confirm that its insiders meet every condition and monitor any changes to the relief.

Other accommodations for Canadian foreign private issuers

  • Proxy rules. FPIs are exempt from the SEC proxy rules and follow Canadian proxy and circular requirements.
  • Regulation FD. FPIs are not subject to Regulation FD, although Canadian selective disclosure rules in NP 51-201 apply.
  • Current reporting. Instead of Form 8-K, FPIs furnish information on Form 6-K when they make it public at home.
  • Executive compensation. FPIs follow home-country disclosure; Canadian issuers use Form 51-102F6.
  • Beneficial ownership reporting. US Schedule 13D and 13G reporting applies to holders of registered equity securities of FPIs, alongside Canadian early warning rules.

Cross-border offerings and liability

US registration brings US liability. Canadian foreign private issuers that offer securities in the United States, whether under MJDS or on Form F-3 or F-1, are exposed to Section 11 and Section 12 liability under the Securities Act of 1933 and to Rule 10b-5 claims under the Exchange Act, in addition to Canadian statutory liability. Disclosure controls, the quality of forward-looking statements and consistency between Canadian and US filings therefore matter on both sides of the border. Documents filed in Canada and furnished on Form 6-K can be incorporated into US registration statements, which extends US liability to them.

Shelf offerings are common. Eligible Canadian issuers often file a Canadian base shelf prospectus and a corresponding MJDS registration statement, allowing them to sell securities in both countries quickly when markets are favourable. Our note on timely disclosure explains the Canadian continuous disclosure standards that feed into those documents.

US exchange listing standards

Canadian foreign private issuers listed on the New York Stock Exchange or Nasdaq can generally follow home-country governance practice instead of many US listing standards, provided they disclose the significant ways their practices differ. Key exceptions apply: audit committees must meet the independence requirements of Exchange Act Rule 10A-3, issuers must notify the exchange of non-compliance, and clawback listing standards adopted under the Dodd-Frank Act apply to FPIs as well. Canadian issuers usually find that Canadian governance rules satisfy most expectations, but compensation committee practices, shareholder approval of equity plans and clawback policies need a specific review.

What happens if status is lost

Under Rule 3b-4(e), once an issuer qualifies as an FPI it can use FPI forms and rules until it fails to qualify at the end of its most recently completed second fiscal quarter. An issuer that fails the test must begin complying with US domestic forms and rules from the first day of its next fiscal year. The consequences include filing annual reports on Form 10-K, quarterly reports on Form 10-Q and current reports on Form 8-K; preparing financial statements in US GAAP; complying with SEC proxy rules and US executive compensation disclosure; full Section 16 obligations, including short-swing profit recovery; Regulation FD; and loss of MJDS for offerings.

The transition is costly and time-consuming, especially the conversion from IFRS to US GAAP and the additional quarterly reporting. Issuers that expect to lose status should plan at least six to nine months ahead. Some Canadian issuers that lose status choose to delist from US exchanges and deregister, if they meet the SEC's deregistration conditions.

The SEC's review of the FPI definition

In June 2025 the SEC published a concept release seeking comment on whether the FPI definition should be changed, reflecting concern that many FPIs are listed only in the United States and are not subject to meaningful home-country regulation. Canadian issuers with active Canadian listings and Canadian reporting obligations are in a different position from issuers with no home-market regulation, but any change to the definition could affect them. Canadian foreign private issuers should monitor follow-up rulemaking and, where relevant, participate in consultations through industry associations.

Practical checklist for Canadian foreign private issuers

  1. Test FPI status each year as of the last business day of the second fiscal quarter, and keep the analysis on file.
  2. Track US shareholdings through nominee inquiries and beneficial ownership reports.
  3. Monitor the residence of directors and executive officers and where the business is administered.
  4. Confirm continued MJDS eligibility, including the USD 75 million public float.
  5. Maintain a single SOX and NI 52-109 control framework.
  6. Confirm insiders' SEDI filings and eligibility for the 2026 Section 16(a) exemptive order.
  7. Keep a contingency plan for loss of status.

Our continuous disclosure compliance page and our note on insider trading and tipping rules cover the Canadian side, and our US desk explains cross-border listings.

How TRW & Co helps

We advise Canadian issuers on their US status and obligations from a Canadian law perspective: annual FPI testing, MJDS eligibility and filings, coordination of Canadian continuous disclosure with SEC reporting, insider reporting under NI 55-104 and the 2026 Section 16 changes, and planning for loss of status or deregistration. We work with US securities counsel on US law questions. This note is general information, not legal advice. To discuss your status, contact us.

Frequently asked questions

How does a Canadian company lose foreign private issuer status?

It fails Rule 3b-4 if, as of the last business day of its second fiscal quarter, more than 50% of its voting securities are held of record by US residents and either a majority of executive officers or directors are US citizens or residents, more than 50% of its assets are in the US, or its business is administered principally in the US.

Who can use Form 40-F?

Under the Form 40-F instructions, a registrant incorporated in Canada that is a foreign private issuer or Crown corporation, has been subject to Canadian periodic reporting for at least 12 calendar months and is in compliance, and has a public float of USD 75 million or more (or filed a Form F-9 before 31 December 2012).

Do directors of Canadian FPIs now file Section 16 reports?

Section 16(a) began applying to FPI directors and officers on 18 March 2026 under the Holding Foreign Insiders Accountable Act. On 5 March 2026, the SEC exempted directors and officers of FPIs from qualifying jurisdictions, including Canada, who are subject to NI 55-104 and meet the order's conditions.

Are FPI insiders subject to short-swing profit rules?

No. The SEC's 2026 amendments kept FPI insiders exempt from Section 16(b) short-swing profit recovery and the Section 16(c) short-selling prohibition, and 10% holders of FPIs remain outside Section 16(a). Canadian insider trading and reporting rules continue to apply.

What happens when a Canadian issuer loses FPI status?

From the first day of its next fiscal year, it must use US domestic forms (10-K, 10-Q, 8-K), generally prepare US GAAP financial statements, comply with SEC proxy rules and full Section 16, and give up MJDS. Planning six to nine months ahead is advisable.

Sources

  1. eCFR: 17 CFR 240.3b-4 (definition of foreign private issuer)
  2. SEC Form 40-F general instructions
  3. SEC fact sheet: Holding Foreign Insiders Accountable Act final amendments
  4. SEC Release No. 34-104931: exemptive order for directors and officers of certain FPIs (5 March 2026)
  5. SEC concept release on foreign private issuer eligibility (Release No. 33-11376, June 2025)

General information only, not legal advice. References to statutes, courts and authorities describe published law and practice at the date shown.