Skip to content
Intellectual Property

Industrial Design Protection in Canada

An industrial design registration is often the quickest way to stop copycats of a product's appearance in Canada. It requires novelty, a filing within 12 months of your own first disclosure, and timely maintenance fees, and it can last up to 15 years from filing.

Designer sketching a consumer product shape to illustrate industrial design registration in Canada

Key takeaways

  • Industrial designs protect shape, configuration, pattern or ornament judged solely by the eye, not function.
  • Your own disclosures more than 12 months before the priority date destroy novelty.
  • Protection lasts until the later of 10 years after registration or 15 years after filing.
  • A maintenance fee is due before the fifth anniversary of registration.
  • Marking articles with a circled "D" and the proprietor's name defeats the innocent infringer defence.

Industrial design protection: the short answer

An industrial design protects how a product looks: its shape, configuration, pattern or ornament. Under the Industrial Design Act (IDA), registration gives the proprietor an exclusive right to stop others making, importing, selling or renting articles bearing the design or one not differing substantially from it. Protection depends on registration, which requires novelty, and the term can run up to 15 years from filing. For consumer products, furniture, packaging and devices, registration is often the fastest and cheapest form of IP protection available.

Designer sketching a consumer product shape to illustrate industrial design registration in Canada
Industrial design registration protects the visual features of a finished article, not how it works.

The key risk is timing. A design that was publicly disclosed more than 12 months before the filing or priority date cannot be registered, and many businesses lose protection by launching first and asking questions later. This article explains what an industrial design is, how to register in Canada and abroad, how long protection lasts, how it interacts with trademarks and copyright, and how designs are enforced.

What counts as an industrial design in Canada

Section 2 of the IDA defines a design, or industrial design, as features of shape, configuration, pattern or ornament, and any combination of them, that in a finished article "appeal to and are judged solely by the eye." Three consequences follow.

  • Appearance, not function. Under s. 7(d), a design is not registrable if it consists only of features dictated solely by a utilitarian function of the article. Functional innovations belong in a patent.
  • A finished article. The design must be applied to an article, meaning anything made by hand, tool or machine. Kits and sets are covered, and the article can be part of a larger product.
  • Visual features only. Methods of manufacture, materials as such, and ideas are not protected.

The other registrability conditions in s. 7 are that the application is properly filed, the design is novel, it was created by the applicant or its predecessor in title, and it is not contrary to public morality or order.

Novelty and the one-year grace period

Novelty is assessed under s. 8.2 against disclosures made anywhere in the world. A design is novel if the same design, or one not differing substantially from it, applied to the same or an analogous article, has not been disclosed by the applicant (or someone who learned of it from the applicant) more than 12 months before the priority date, has not been disclosed by anyone else before the priority date, and has not appeared in an earlier-priority Canadian design application.

The grace period protects only the applicant's own disclosures. A competitor's independent disclosure the day before filing destroys novelty. The safest course is to file before any public launch, trade show, crowdfunding campaign or online listing, and to use the grace period only as a fallback.

Practical point

Keep a dated record of every public disclosure of a new design, including social media teasers and investor decks shared without confidentiality. The 12-month clock under s. 8.2 runs from the first disclosure, not from the commercial launch.

Registering a design in Canada and abroad

Applications are filed with the Canadian Intellectual Property Office (CIPO) and examined for registrability. The 2018 reforms, in force on 5 November 2018 according to CIPO's backgrounder on the new Industrial Design Regulations, simplified filing: no prescribed form or written description is required, applications are generally made public at the earlier of registration or 30 months from the filing or priority date, and divisional applications may be filed. Good drawings or photographs are critical because they define the scope of protection; solid lines show claimed features and broken lines can disclaim others.

The same reforms allowed Canada to join the Hague Agreement Concerning the International Registration of Industrial Designs. Through the Hague System, a single international application filed with the World Intellectual Property Organization can designate Canada and other member countries. Convention priority also lets an applicant who filed first in a Paris Convention country claim that earlier date in Canada if it files within the priority period.

IssueCanadian ruleSource
Subject matterShape, configuration, pattern or ornament judged solely by the eyeIDA, s. 2
NoveltyAssessed worldwide; applicant's own disclosures up to 12 months before priority date excludedIDA, s. 8.2
TermLater of 10 years from registration or 15 years from filingIDA, s. 10(1)
MaintenanceFee due before the fifth anniversary of registrationIDA, s. 10(2); CIPO backgrounder
RemediesInjunction, damages or profits, punitive damages, disposal of infringing articlesIDA, s. 15.1
LimitationNo remedy for acts more than three years before the actionIDA, s. 18

Term and maintenance of design rights

Under s. 10(1), the exclusive right begins on the later of registration and the date the application is made available to the public, and ends on the later of 10 years after registration and 15 years after the filing date. To keep the right, the proprietor must pay maintenance fees; under s. 10(3), if the fee is not paid in time the term is deemed to have expired. CIPO's backgrounder explains that the fee is due before the fifth anniversary of registration, with a six-month late period on payment of a surcharge. Docketing that deadline is a simple but important task for any design portfolio.

Product appearance can sometimes be protected in other ways, but each alternative has limits:

  • Copyright. Original artistic works are protected automatically, but s. 64(2) of the Copyright Act removes copyright infringement protection for a design applied to a useful article once the article is reproduced in a quantity of more than fifty with the owner's authority, subject to exceptions in s. 64(3) for, among other things, graphic or photographic representations applied to the face of an article, trademarks and labels, woven or knitted patterns and architectural works. For mass-produced articles, industrial design registration is therefore usually the route.
  • Trademarks. A distinctive shape can be registered as a trademark and protected indefinitely, but only if it is distinctive of a single source and its features are not primarily utilitarian. Proving acquired distinctiveness for a shape takes time and evidence. See our insight on non-traditional trademarks.
  • Patents. Patents protect new and useful functional features, not appearance. Many products justify both a patent and an industrial design filing; see our patents page.

A layered strategy often works best: file an industrial design before launch to secure early exclusivity, then build trademark rights in the shape over the following years as the market comes to associate it with the brand.

Enforcing a registered design

Under s. 11, during the term no one may, without the proprietor's licence, make, import for trade or business, sell, rent, or offer or expose for sale or rent an article to which the registered design, or one not differing substantially from it, has been applied. Equivalent acts in relation to kits are also caught. Section 11(2) directs courts, when assessing substantial differences, to consider how far the registered design differs from previously published designs; a design in a crowded field receives narrower protection.

Infringement actions may be brought by the proprietor or an exclusive licensee under s. 15, in the Federal Court (which has concurrent jurisdiction under s. 15.2) or a provincial superior court. Courts may grant injunctions, damages or profits, punitive damages and disposal of infringing articles. Two limits matter in practice:

  1. Innocent infringement. Under s. 17(1), only an injunction is available if the defendant shows it did not know and had no reasonable grounds to suspect the design was registered. The defence does not apply if the proprietor marked substantially all articles, or their labels or packaging, with a capital "D" in a circle and the proprietor's name.
  2. Three-year look-back. Under s. 18, no remedy may be awarded for infringements committed more than three years before the action began.

Illustration: a kitchenware company registers the design of a kettle and sells it in packaging marked with the circled "D" and its name. A retailer imports near-identical kettles. Because the packaging was marked, the importer cannot limit the company to an injunction by pleading ignorance, and the company may seek damages or profits for the infringing sales. Border measures are discussed in our insight on anti-counterfeiting and border measures, and litigation strategy on our IP litigation page.

Ownership, transfers and licences of an industrial design

Ownership questions arise more often than businesses expect. Under s. 12(1) of the IDA, the author of a design is its first proprietor unless the author executed the design for another person for good and valuable consideration, in which case that other person is the first proprietor. That rule usually favours a business that commissions and pays for a design, but it is not a substitute for clear written terms with employees, freelance designers and manufacturers, particularly when design work is done abroad or under a broader development agreement.

Under s. 13, every design, whether registered or unregistered, is transferable in whole or in part, and CIPO records transfers of applications and registers transfers of registered designs on request and proof. Recording transfers promptly keeps the register accurate for enforcement and due diligence.

Licences should state whether the licensee is exclusive, because s. 15 allows an exclusive licensee to sue for infringement, subject to its agreement with the proprietor, and the proprietor must be or be made a party. Section 11.1 also confirms that protection does not extend to features dictated solely by a utilitarian function or to any method or principle of manufacture or construction. See our insight on IP ownership by employees and contractors; licensing terms are covered in a separate insight.

Building a design portfolio: practical steps

A disciplined process avoids most of the problems seen in practice:

  1. Identify the visual features that buyers notice and competitors are likely to copy, and decide whether to protect the whole article or a part of it.
  2. File before any public disclosure where possible, or at the latest within 12 months of your own first disclosure.
  3. Prepare drawings that claim the commercially important features and disclaim incidental ones, so minor changes by copyists do not escape the registration.
  4. Choose between national filings and a Hague international application based on the markets that matter and the cost of local examination.
  5. Docket maintenance deadlines and mark products, labels or packaging with the circled "D" and your name.
  6. Review the portfolio when products are redesigned, so new versions are covered.

How TRW & Co helps with industrial design strategy

We advise companies on Canadian industrial design strategy as part of their wider IP portfolio: deciding what to register and when, aligning launch plans with the novelty rules, coordinating Hague and national filings with a registered agent, structuring ownership and licences of design rights, and preparing or defending infringement claims. Industrial design applications can be prosecuted before CIPO by the applicant or an agent; we work alongside agents and advise on the legal and commercial issues. To discuss a new product or an infringement concern, contact us.

Frequently asked questions

How long does industrial design protection last in Canada?

Under s. 10(1) of the Industrial Design Act, the exclusive right ends on the later of 10 years after registration and 15 years after the filing date of the application. The proprietor must pay a maintenance fee, due before the fifth anniversary of registration according to CIPO, or the term is deemed to have expired.

Can I register a design after I have started selling the product?

Possibly. Disclosures by the applicant, or by someone who learned of the design from the applicant, are disregarded if they occurred no more than 12 months before the priority date. After 12 months, your own sales or publications destroy novelty, and any disclosure by an independent third party before filing does so immediately.

Does Canada accept international design applications under the Hague System?

Yes. Reforms that came into force on 5 November 2018 allowed Canada to join the Hague Agreement. An applicant can file one international application with WIPO designating Canada and other member countries, and CIPO then examines the Canadian designation under Canadian law.

Is copyright enough to protect a product design?

Usually not for mass-produced goods. Under s. 64(2) of the Copyright Act, once a design applied to a useful article is reproduced in more than fifty copies with the owner's authority, copying the design is generally no longer copyright infringement, subject to listed exceptions. Industrial design registration fills that gap.

What remedies are available for industrial design infringement?

A court may grant an injunction, damages or an accounting of profits, punitive damages and the disposal of infringing articles. Remedies other than an injunction are unavailable against an innocent infringer unless the articles were marked, and no remedy is awarded for acts more than three years before the action.

Sources

  1. Industrial Design Act, R.S.C. 1985, c. I-9
  2. CIPO backgrounder: Canada's new Industrial Design Regulations (June 2018)
  3. Copyright Act, R.S.C. 1985, c. C-42

General information only, not legal advice. References to statutes, courts and authorities describe published law and practice at the date shown.