Clean Economy ITC Labour Requirements: Wages and Apprentices
Canada's clean economy investment tax credits pay their full rate only if claimants meet labour conditions on wages and apprentices. The ITC labour requirements in s. 127.46 of the Income Tax Act reach contractors' workers on site, require attestations and notices, and carry daily charges and penalties when they are missed.

Key takeaways
- Full-rate clean economy credits require an election to meet prevailing wage and apprenticeship requirements.
- Without the election, the credit rate drops by 10 percentage points.
- Covered workers are on-site workers doing primarily manual or physical work, including contractors' employees.
- Apprentices in Red Seal trades should perform at least 10% of Red Seal labour hours.
- Shortfalls cost CAD 20 per worker-day and CAD 50 per apprentice-hour, indexed, unless corrected.
- Budget 2026 proposes extending the Clean Technology and Clean Electricity credits to 2040.
What the ITC labour requirements are
The ITC labour requirements are conditions attached to four refundable clean economy investment tax credits in the Income Tax Act (ITA): the carbon capture, utilization and storage (CCUS) credit in s. 127.44, the Clean Technology credit in s. 127.45, the Clean Hydrogen credit in s. 127.48 and the Clean Electricity credit in s. 127.491. Section 127.46 provides that each credit is available only at a "reduced tax credit rate", which is the regular rate minus 10 percentage points, unless the claimant elects to meet prevailing wage and apprenticeship requirements for each year in which specified property is prepared or installed.

For the Clean Technology credit, that means 30% with the election and 20% without. For large projects, the difference can be worth tens of millions of dollars, which explains why developers, utilities and manufacturers pay close attention to the ITC labour requirements. The rules were announced in Budget 2023 and apply to work performed on or after 1 October 2023.
The requirements look like labour law but are tax rules. They are administered by the CRA, enforced through additions to tax and penalties, and assessed on audit of the credit claim. They operate alongside, not instead of, provincial employment standards and collective agreements.
The election and covered workers
A claimant, called an "incentive claimant", must elect in prescribed form and manner to meet both sets of requirements for each installation taxation year. The election is all or nothing: a claimant cannot elect only the wage requirement. The requirements then apply to "covered workers" at each "designated work site" where specified property is located.
A covered worker is an individual engaged in preparing or installing specified property at a designated work site, as an employee of the claimant or of any other person or partnership, whose work is primarily manual or physical. Administrative, clerical and executive employees are excluded, as are business visitors to Canada under s. 187 of the Immigration and Refugee Protection Regulations. The inclusion of contractors' and subcontractors' employees is the feature that makes compliance demanding: the claimant must take reasonable steps to ensure that workers employed by others on its site are paid properly.
Prevailing wage requirements
Unless prescribed conditions apply, each covered worker must be compensated for work on specified property either under an eligible collective agreement that applies to the worker or at least at the regular wages (excluding overtime) and benefits in the eligible collective agreement that most closely aligns with the worker's experience, tasks and location.
Outside Quebec, an eligible collective agreement is the most recent multi-employer agreement negotiated with a trade union affiliated with Canada's Building Trades Unions for the trade in the region or province, a qualifying project labour agreement, or a prescribed agreement. In Quebec, it is a collective agreement negotiated under provincial law or a prescribed agreement. "Benefits" means vacation, pension, health and welfare benefits required under the agreement.
The claimant must attest that it met the wage requirement for its own employees and took reasonable steps for others, and must post a notice at the site, or communicate it electronically, explaining in plain language that the site is subject to prevailing wage requirements and how workers can report failures to the CRA. Where the benchmark agreement has expired, its wage and benefit amounts are indexed by CPI.
Apprenticeship requirements
The claimant must make reasonable efforts to ensure that apprentices registered in a Red Seal trade work at least 10% of the total hours worked by Red Seal workers on preparing or installing specified property at the site during the year. If a law or collective agreement limits apprentice-to-journeyperson ratios so that 10% cannot be reached, the claimant must make reasonable efforts to reach the highest percentage possible within those limits. A Red Seal worker is a covered worker whose duties are, or are equivalent to, those of a Red Seal trade. The claimant attests to compliance.
| Element | Requirement | Consequence of shortfall (no gross negligence) |
|---|---|---|
| Prevailing wages | Pay at least the eligible collective agreement wage and benefits | CAD 20 per covered worker per day not paid properly (indexed after 2023), unless corrected by top-up |
| Apprentice hours | Reasonable efforts to reach 10% of Red Seal hours | CAD 50 per hour of shortfall (indexed after 2023) |
| Attestations | Attest to wage and apprenticeship compliance in prescribed form | Credit at regular rate depends on valid election and attestations |
| Notice to workers | Visible poster or electronic notice | Part of the prevailing wage requirements |
Top-up payments and charges
The ITC labour requirements are designed to encourage correction. If the CRA notifies a claimant that it did not meet the wage requirement at a site, the claimant may, within one year (or a longer period acceptable to the Minister), pay each affected covered worker a top-up equal to the shortfall plus interest. If the claimant does not pay a required top-up, it must pay the Receiver General a penalty of 120% of the top-up amount. Separately, the additions to tax in s. 127.46(6) and (7) apply per worker-day and per hour of apprentice shortfall, adjusted for inflation each year after 2023.
Where the CRA determines that the claimant knowingly, or in circumstances amounting to gross negligence, failed to meet either requirement, the regular rate is denied entirely, the credit falls to the reduced rate, and a penalty of 50% of the difference between the two credit amounts applies. The CCUS refurbishment credit is excluded from that gross negligence rule.
The claimant bears the risk for its contractors' workers. Engineering, procurement and construction contracts should require contractors and subcontractors to pay prevailing wages, report hours by trade and apprenticeship status, provide payroll evidence on request, cooperate with top-ups and indemnify the owner for additions to tax and penalties. Flow-down clauses are the main tool for managing ITC labour requirements on a multi-employer site.
Making the ITC labour requirements work on site
Compliance is mostly a data problem. The claimant needs to know, for every covered worker, the trade, location, hours, wages and benefits, and to compare them with the benchmark agreement. It also needs Red Seal hours and apprentice hours by site. Practical steps include:
- Identify the eligible collective agreements for each trade and region before tendering.
- Build wage and benefit floors and apprenticeship targets into bid documents.
- Collect certified payroll and timesheet data monthly from every contractor.
- Post the notice at each designated work site and keep evidence that it was posted.
- Reconcile apprenticeship hours quarterly so shortfalls can be addressed during construction.
- Keep the attestations and supporting evidence with the credit claim file.
Owners in Quebec should take account of the province's construction-industry regime, under which collective agreements negotiated under provincial law already govern most construction wages, which simplifies the wage benchmark but not the record-keeping.
Residual issues and CRA guidance
Several questions remain matters of interpretation and CRA guidance. They include how to identify the "most closely aligned" agreement where trades overlap, how to treat benefits paid in different forms, how to measure hours for workers who split time between specified and other property, how far "reasonable steps" extend to subcontractors several tiers down, and how the rules apply to off-site fabrication. The CRA has published guidance and forms on the labour requirements, and claimants should check the current versions before filing. Where guidance is silent, a documented, consistent methodology applied across the project is the best protection.
The labour requirements also interact with immigration rules. Foreign specialists brought in for commissioning may be business visitors excluded from the covered worker definition, but only if their activities fit s. 187 of the Immigration and Refugee Protection Regulations. Our insight on business visitors explains that test.
Budget 2026 and the credit horizon
The Budget 2026 tax measures propose to extend the Clean Technology and Clean Electricity investment tax credits to property that becomes available for use before 2041, with the Clean Technology rate falling to 15% only in its final year, 2040. Budget 2026 also proposes to add high-voltage intra-provincial transmission property to the Clean Electricity credit for property acquired on or after Budget Day. The budget restates that claimants must meet prevailing wage and apprenticeship requirements to obtain the full credit rates. The longer horizon means the ITC labour requirements will shape construction contracting for clean energy projects well into the 2030s.
Illustration
A utility builds a battery storage facility in Ontario, eligible for the Clean Technology credit at 30% if it elects into the ITC labour requirements. The general contractor employs electricians and labourers, and two subcontractors supply ironworkers and crane operators. Before tendering, the utility identifies the Building Trades-affiliated multi-employer agreements for each trade in the region and writes their wage and benefit rates into the tender as minimums.
During construction, monthly payroll reports show that one subcontractor paid its ironworkers below the benchmark for six weeks. The utility requires the subcontractor to pay the shortfall with interest before year-end, so no addition to tax arises. Apprentice hours reach 11% of Red Seal hours, and the utility files its election and attestations with its return.
If the utility had skipped the election, its credit would have been 20%, not 30%. On CAD 200 million of eligible property, that is a CAD 20 million difference, which is why the compliance cost is usually worth bearing.
Relationship with labour and employment law
The ITC labour requirements do not make the benchmark collective agreement binding on non-union employers, and they do not create union rights. A non-union contractor can comply by paying at least the benchmark wage and benefit amounts. However, provincial employment standards, occupational health and safety laws and any collective agreements actually in force still apply in full. Where a site is unionized, the governing agreement will usually satisfy the wage condition for those workers. Owners should also check provincial apprenticeship legislation, which governs registration and ratios and therefore affects how the 10% target is measured.
Audits and disputes
Credit claims of this size attract review. The CRA can examine payroll records of the claimant and, through the claimant, of contractors, and can rely on worker complaints prompted by the posted notice. Disputes over the regular rate, additions to tax and penalties follow the usual objection and Tax Court of Canada process. Claimants should prepare as if each project will be audited, with a single compliance file per designated work site.
How TRW & Co helps
We advise developers, utilities, manufacturers and contractors on ITC labour requirements and clean economy credits: election and attestation strategy, identification of benchmark agreements, contract flow-downs, compliance programs, top-ups, and CRA audits and appeals. This work connects with our power and renewables and construction law practices and our corporate tax team. See also our insight on Budget 2026 tax measures. This page is general information, not legal advice. Contact us to review your project.
Frequently asked questions
Which credits do the labour requirements affect?
They affect the CCUS credit, the Clean Technology credit, the Clean Hydrogen credit and the Clean Electricity credit. For each, the regular rate is available only if the claimant elects to meet the prevailing wage and apprenticeship requirements; otherwise the rate is reduced by 10 percentage points.
Do the requirements cover subcontractors' workers?
Yes. A covered worker can be employed by the claimant or any other person or partnership, if the worker prepares or installs specified property at a designated work site and the work is primarily manual or physical. The claimant must take reasonable steps to ensure those workers are paid prevailing wages.
What happens if a worker was underpaid?
If the CRA notifies the claimant, the claimant can pay a top-up equal to the shortfall plus interest within one year or a longer accepted period. Additions to tax of CAD 20 per worker-day, indexed, can apply, and failing to pay a required top-up triggers a penalty of 120% of the amount.
Is the 10% apprenticeship target absolute?
No. The claimant must make reasonable efforts to reach 10% of Red Seal labour hours. If law or a collective agreement restricts apprentice ratios, it must make reasonable efforts to reach the highest percentage possible. Shortfalls without such efforts cost CAD 50 per hour, indexed.
What if non-compliance was deliberate?
If the CRA determines the failure was knowing or grossly negligent, the claimant loses the regular rate, receives only the reduced rate, and pays a penalty of 50% of the difference between the regular and reduced credit amounts.
Sources
General information only, not legal advice. References to statutes, courts and authorities describe published law and practice at the date shown.


