Skip to content
Employment, Labour & Pensions

Business Visitors to Canada: What Activities Are Allowed

Business visitors can enter Canada to meet, buy, sell, train and service equipment without a work permit, but only within tight limits. This guide explains the s. 187 IRPR test, after-sales and warranty work, CUSMA business visitors, what to carry to the border and when a planned visit has quietly become work that needs a permit.

Business visitors from a foreign company meeting Canadian colleagues in a boardroom

Key takeaways

  • Business visitors must be paid abroad, by a business whose profits accrue predominantly outside Canada.
  • Meetings, board attendance, buying, selling to businesses and intra-company training are generally allowed.
  • After-sales service must stem from the original sale or lease agreement and exclude hands-on trades work.
  • Contracted service delivery for a Canadian client usually needs a work permit.
  • Misrepresentation can bar a traveller for five years; employers face offence liability.

Who counts as business visitors in Canada

Business visitors are foreign nationals who may perform limited work in Canada without a work permit because their activity is international in scope and does not put them directly into the Canadian labour market. The authority is s. 186(a) of the Immigration and Refugee Protection Regulations (IRPR), and the definition is in s. 187. A person qualifies either by fitting one of the specific cases in s. 187(2) or by showing, under s. 187(1) and (3), that they are engaged in international business activities without directly entering the labour market.

Business visitors from a foreign company meeting Canadian colleagues in a boardroom
Business visitors may meet, buy, train and supervise in Canada, but hands-on productive work usually requires a work permit.

Section 187(3) gives the test teeth. The activity counts only if the primary source of remuneration is outside Canada and the principal place of business and actual place of accrual of profits remain predominantly outside Canada.

In other words, the visitor is paid by, and works for the benefit of, a foreign business. The listed cases in s. 187(2) are buyers of Canadian goods or services (and people receiving training on them), employees receiving or giving training within a Canadian parent or subsidiary where any resulting production is incidental, and sellers representing a foreign business who do not sell to the general public. IRCC's officer instructions confirm that these cases are examples rather than a closed list (IRCC, Temporary resident: business visitors, updated 19 March 2026).

Activities generally allowed

IRCC's program delivery instructions on business visitors under R186(a) describe a familiar set of activities that border officers generally accept, provided the s. 187(3) factors are met:

  • attending business meetings, conferences, trade shows and exhibitions, as long as the visitor is not selling to the public;
  • attending board of directors' meetings;
  • buying Canadian goods or services for a foreign business, and receiving training or familiarization on them;
  • giving or receiving training within a Canadian parent or subsidiary of the foreign employer, where production is incidental;
  • after-sales service on specialized equipment, within the limits described below;
  • supervising the installation of specialized machinery and training Canadian staff after installation.

Most intra-company business travel fits comfortably: a US-based finance director attending quarterly meetings in Toronto, a German engineer reviewing a project with a Canadian customer, or a sales team meeting distributors. The difficulty arises when the visit moves from discussing work to doing it.

Intra-company meetings and training

Groups with a Canadian parent or subsidiary rely heavily on s. 187(2)(b). Employees of the foreign entity may come to Canada to receive training from, or give training to, the Canadian affiliate, so long as any goods or services produced during the training are incidental. A two-week onboarding program on a proprietary system is a classic example. Training that becomes a vehicle for staffing a production shift, or that runs for months with the trainee doing billable work, is not. Records showing the curriculum, the trainers and the trainees' home-country payroll are the best evidence that the visit stays on the right side of the line.

Remote work during a visit

A related question is whether a visitor in Canada for personal reasons may keep working remotely for a foreign employer. In announcing its Tech Talent Strategy in June 2023, IRCC stated that a digital nomad working remotely for a foreign employer needs only visitor status, for up to six months at a time. That position is fact-specific, and it does not cover a visitor who begins serving Canadian customers or reporting into the Canadian entity. Employers with mobile staff should set a written policy on cross-border remote work so that immigration, tax and employment-standards exposure is assessed together rather than discovered after the fact.

After-sales service and warranty work

After-sales service is the category that produces the most disputes at the border, and the rules are specific. According to IRCC's instructions, business visitors may enter to repair, service, set up, test or supervise work on specialized commercial or industrial equipment bought or leased outside Canada. Three limits matter:

  • The service must be part of the original deal. The service obligation must be in the original sales, lease or rental agreement, or in an extension of it (for example, a warranty or service agreement). A service contract negotiated with a third party after the sale is not covered, although a third company named in the original agreement as the servicer can rely on the exemption.
  • No hands-on building trades work. Set-up that involves work by electricians, pipe fitters and similar trades is excluded, with a limited exception for prefabricated structures that need proprietary knowledge. Supervision normally excludes hands-on work.
  • Work outside the warranty needs a permit. Repairs or upgrades that are not covered by a warranty or service agreement in the original transaction require a work permit; software upgrades can qualify only where the after-sales activity is clearly stated in the agreement or purchase order.

IRCC also distinguishes a different and common scenario. Where a Canadian company contracts with a foreign company to provide a service, and the foreign company sends its own employee to deliver it, that employee is generally not a business visitor and needs a work permit. Many cross-border service models, including implementation consultants and project-based IT work, fall into this category.

CUSMA business visitors

Chapter 16 of the Canada–United States–Mexico Agreement (CUSMA) adds a parallel category for citizens of the United States and Mexico. IRCC's CUSMA instructions describe the covered business activities as research and design; growth, manufacture and production; marketing; sales; distribution; after-sales service; and general service. Permanent residents of the United States or Mexico who are not citizens do not qualify, and visitors still need a visa or electronic travel authorization where applicable. In practice the CUSMA list overlaps substantially with s. 187, but it can help US and Mexican citizens whose activities are framed by the agreement's categories. Similar business-visitor provisions appear in other trade agreements, including the CPTPP.

ScenarioUsually business visitor?Why
Attending a board meeting of the Canadian subsidiaryYesBoard attendance is expressly recognized and is not labour-market work
Negotiating a supply contract with a Canadian customerYesSelling for a foreign business, not to the general public
Training Canadian staff of an affiliate, with incidental productionYesSection 187(2)(b) covers intra-company training
Repairing equipment sold from abroad under the original warrantyYes, within limitsAfter-sales service on specialized equipment in the original agreement
Electrical installation of a new production lineNoHands-on building trades work is excluded
Consultant delivering a paid project for a Canadian clientGenerally noContracted service delivery enters the labour market
Covering a vacant role in the Canadian office for three monthsNoProductive work for the Canadian entity

Preparing business visitors for the border

Admission as a business visitor is decided by a Canada Border Services Agency officer at the port of entry, and IRCC's instructions put the onus on the traveller to provide all relevant documentation. Good preparation looks like this:

  1. Employer support letter from the foreign employer confirming the traveller's role, that they remain paid abroad, the purpose and length of the visit and who covers expenses. Where the employer pays for the trip, IRCC notes this does not replace proof of the applicant's own funds and establishment for visa purposes.
  2. Invitation letter from the Canadian host describing the meetings, training or service to be performed.
  3. For after-sales service: a copy of the relevant sales, lease or warranty clause, the equipment details and confirmation that the work is supervisory or specialized rather than building-trades work.
  4. A consistent narrative. The traveller should describe the visit accurately and in the same terms as the letters. Vague or inconsistent answers are the most common cause of refusal.

Groups that send many travellers should standardize these documents. A short internal approval form, completed before booking, that asks who pays the traveller, what they will physically do in Canada, whether any customer contract is involved and whether equipment is under warranty, catches most problem visits early and gives the immigration team time to choose a permit route if needed.

Stays longer than six months are unusual for business visitors and, under IRCC's instructions, are documented with a visitor record. Frequent travellers with a good compliance history may be eligible for longer-term multiple-entry visas.

Practical point

Write the after-sales service obligation into the original equipment sale or lease agreement, naming any third-party servicer. A one-line clause signed at the time of sale can be the difference between technicians being admitted as business visitors and a work-permit application with weeks of lead time.

Work-permit triggers and the cost of getting it wrong

A visit is likely to need a work permit where the traveller will produce goods or services for the Canadian entity, fill a role, be paid in Canada, perform hands-on installation or construction, or deliver a contracted project. For those cases, intra-company transferee permits, CUSMA professional permits and other LMIA-exempt categories are often available, but they take planning.

The consequences of using the business visitor route incorrectly fall on both sides. A foreign national who misrepresents or withholds material facts can be found inadmissible for misrepresentation under s. 40 of the Immigration and Refugee Protection Act (IRPA), and s. 40(2)(a) extends that inadmissibility for five years.

Section 124(1)(c) IRPA makes it an offence to employ a foreign national in a capacity in which they are not authorized to be employed, punishable under s. 125 by a fine of up to CAD 50,000 and up to two years' imprisonment on indictment. Repeated border issues can also complicate later work-permit and permanent-residence applications for the same individuals. Where business visitors become regular, long-term or productive workers, the employer should move them onto a proper permit; the conditions that then apply, and the employer compliance inspections that test them, are covered separately.

Illustration: a hypothetical US equipment maker sells a packaging line to an Alberta food processor. The sale agreement includes a two-year warranty with on-site service by the seller's technicians. A US technician who flies in to diagnose and repair a fault under that warranty can generally seek entry as a business visitor; the same technician returning to install a second line bought later under a separately negotiated service contract, with local electricians working under his direction, would raise much harder questions.

How TRW & Co helps

We advise multinational employers on Canadian business immigration strategy and on the practical steps of doing business in Canada. For business visitors, we review travel programs and recurring visit patterns, draft support and invitation letter templates, build after-sales service and warranty clauses into equipment and supply agreements, and identify when a visit has become work that requires a permit. We work with Canadian-licensed counsel and regulated immigration consultants where an application or representation requires one. This page is general information, not legal advice. To review a travel program or an upcoming project, contact us.

Frequently asked questions

Do business visitors need a visa?

Business visitors need the same entry document as any visitor of their nationality: a temporary resident visa for visa-required nationals, or an electronic travel authorization for most visa-exempt travellers flying to Canada. US citizens are generally exempt from both. The business visitor exemption removes the need for a work permit, not the need to be admissible as a visitor.

Can a business visitor be paid by the Canadian company?

The test in s. 187(3) IRPR requires the primary source of remuneration to be outside Canada and the principal place of business and accrual of profits to remain predominantly abroad. Reimbursement of travel expenses by a Canadian host is common, but salary or fees paid by the Canadian entity point strongly toward labour-market entry and a work permit.

Can technicians install equipment as business visitors?

They can supervise installation of specialized machinery and perform after-sales service under a warranty or service agreement in the original sales or lease contract. Hands-on building trades work, such as electrical or pipe-fitting work, is excluded, and service contracts negotiated separately after the sale generally require a work permit.

Is there a maximum stay for business visitors?

There is no fixed statutory maximum. Visitors are generally admitted for up to six months, and IRCC's instructions call for a visitor record and a note of the reason where a longer stay is authorized. The longer and more regular the presence in Canada, the harder it becomes to show the activity is not labour-market work.

Does CUSMA give US citizens broader rights than other business visitors?

CUSMA lists business visitor activities for US and Mexican citizens, from research and design to sales, distribution and after-sales service. The categories overlap heavily with the general rules in s. 187 IRPR. The agreement mostly adds certainty for covered citizens rather than permitting productive work in Canada.

Sources

  1. Immigration and Refugee Protection Regulations, ss. 186–187
  2. IRCC: Business visitors [R186(a)] – International Mobility Program
  3. IRCC: Canada–United States–Mexico Agreement – International Mobility Program
  4. IRCC: Temporary resident – business visitors (updated 19 March 2026)
  5. Immigration and Refugee Protection Act, ss. 40, 124–125

General information only, not legal advice. References to statutes, courts and authorities describe published law and practice at the date shown.