Accelerated Capital Cost Allowance: Using the 2026 Incentives
Accelerated capital cost allowance has become one of the most important levers in Canadian tax policy. The original Accelerated Investment Incentive was re-introduced for property acquired after 2024, and the federal government proposed on 15 September 2026 to go further with immediate expensing for most depreciable property through the Productivity Mega Deduction.

Key takeaways
- Capital cost allowance spreads the cost of depreciable property over time by class and rate.
- Re-accelerated investment incentive property acquired after 2024 gets an enhanced first-year deduction.
- The proposed Productivity Mega Deduction would allow immediate expensing of most property acquired on or after 15 September 2026.
- Buildings, goodwill and some vehicles are excluded from the proposed immediate expensing.
- Temporary expensing for manufacturing and processing buildings is proposed in Bill C-31.
- Proposals are not law: model both enacted rules and proposals before committing capital.
How capital cost allowance works
To understand accelerated capital cost allowance, start with the default rule: businesses in Canada cannot deduct the full cost of most capital assets in the year of purchase. Instead, paragraph 20(1)(a) of the Income Tax Act (ITA) allows a capital cost allowance (CCA) deduction calculated under Part XI of the Income Tax Regulations and Schedule II. Assets are pooled in classes, each with a prescribed rate, applied on a declining-balance basis to the undepreciated capital cost (UCC) of the class. Under the "half-year rule", only half the normal deduction is usually available in the year of acquisition.

Accelerated capital cost allowance changes the timing, not the total, of deductions. Over the life of an asset, the business deducts its cost either way. But because a deduction today is worth more than a deduction in ten years, faster write-offs reduce the effective tax rate on new investment and improve project returns. That is why successive governments have used accelerated capital cost allowance to respond to competitive pressure, notably after the 2017 US tax reform and again in 2025 and 2026.
For 2026 planning, three layers matter: the enacted re-accelerated investment incentive, enacted class-specific measures such as immediate expensing for certain clean energy and manufacturing equipment, and proposals that are not yet law, including the Productivity Mega Deduction and expensing for manufacturing and processing buildings.
From the Accelerated Investment Incentive to re-acceleration
The Accelerated Investment Incentive (AII), introduced in 2018, applied to property acquired after 20 November 2018 and before 2025 that became available for use before 2028. It suspended the half-year rule and allowed a first-year deduction of up to three times the normal amount for most classes, with full expensing for manufacturing and processing machinery (Class 53) and clean energy equipment (Classes 43.1 and 43.2) for a period, phasing down from 2024.
Following Budget 2025, the regulations now also define "reaccelerated investment incentive property": property (other than zero-emission vehicles in Classes 54 to 56) acquired after 2024 and available for use before 2034, subject to conditions excluding property previously owned by the taxpayer or a non-arm's length person. For most classes, the first-year deduction for such property is enhanced, with a stronger enhancement for property available for use before 2030 and a smaller one from 2030. In practice this restores a materially accelerated capital cost allowance for most new business investment.
| Measure | Status in November 2026 | Main effect |
|---|---|---|
| Accelerated Investment Incentive | Enacted; applies to property acquired before 2025 and available for use before 2028 | Suspended half-year rule; enhanced first-year CCA |
| Re-accelerated investment incentive property | Enacted in the regulations | Enhanced first-year CCA for property acquired after 2024, stronger before 2030 |
| Productivity Mega Deduction | Proposed 15 September 2026; draft legislation released | Immediate expensing for most depreciable property acquired on or after 15 September 2026 |
| Manufacturing and processing buildings | Proposed in Bill C-31 (at report stage on 4 November 2026) | Temporary 100% expensing for eligible buildings acquired from 4 November 2025 and first used before 2030, with a phase-down |
The proposed Productivity Mega Deduction
On 15 September 2026, the Department of Finance announced the Productivity Mega Deduction and released draft legislative proposals. It would allow immediate expensing of most depreciable property subject to the CCA rules, and of eligible Canadian development expenses, acquired on or after 15 September 2026. The government estimates that about two-thirds of business capital investment would qualify, compared with about 15% under the Budget 2025 measures, at an incremental fiscal cost of about CAD 36 billion over five years. Finance describes the measure as permanent.
The proposal excludes Class 1 and Class 3 buildings and additions, Classes 14, 14.1 and 51 (for example, limited-life intangibles, goodwill and regulated gas pipelines), certain Class 10 and 10.1 vehicles, and property under Schedules V and VI. Used property qualifies only if neither the taxpayer nor a non-arm's length person previously owned it and it was not acquired on a tax-deferred rollover. Loss-creation limits would apply to individuals and to partnerships with individual members, similar to the 2021 small business expensing measure. The Accelerated Investment Incentive would remain for property that is not eligible for immediate expensing.
The Productivity Mega Deduction is not yet law. The Budget 2026 environmental and economic assessments list it among the government's measures, but taxpayers filing returns before enactment must decide whether to claim on the basis of the proposal. The CRA generally administers announced measures, but the risk of changes in the final legislation sits with the taxpayer. Document the acquisition date and available-for-use date of every asset acquired after 15 September 2026.
Manufacturing and processing buildings and greenhouses
Buildings have traditionally depreciated slowly. Bill C-31, the Budget 2025 Implementation Act, No. 2, would allow temporary 100% immediate expensing for eligible manufacturing or processing buildings acquired from 4 November 2025 and first used before 2030, with a phase-down afterwards, according to the Library of Parliament's legislative summary. The bill was at report stage in the House of Commons on 4 November 2026. Because Class 1 buildings are excluded from the Productivity Mega Deduction, the building measure is the relevant one for new plants, and Finance has said manufacturing and processing buildings will keep the Budget 2025 expensing.
The building proposal raises definitional questions that will matter in practice. A building must generally be used primarily for manufacturing or processing to qualify, so mixed-use facilities that combine production with warehousing, offices or retail need careful analysis, and the share of floor space used for production may decide eligibility. Taxpayers that buy an existing plant rather than build a new one should check the rules on previously used property. Construction contracts that straddle the start date should record when costs are incurred and when the building is first used.
The regulations already contain a separate measure for eligible greenhouses acquired after 3 November 2025, including transitional rules for greenhouses under construction on 4 November 2025. Agricultural producers should review those rules.
Class-specific rules that still matter
- Class 53 and Class 43. Manufacturing and processing machinery acquired after 2015 has enjoyed accelerated rates; the regulations provide specific factors for property available for use in different years.
- Clean energy Classes 43.1 and 43.2. Eligible clean energy equipment has its own accelerated treatment, which interacts with the Clean Technology and Clean Electricity investment tax credits that reduce capital cost.
- Zero-emission vehicles (Classes 54 to 56). These have their own enhanced rules and are excluded from re-accelerated investment incentive property.
- Immediate expensing for CCPCs. The earlier immediate expensing measure for designated immediate expensing property of CCPCs and certain individuals and partnerships, up to an annual limit, remains in the regulations for property acquired during its window.
Accelerated capital cost allowance also interacts with recapture and terminal loss rules. If an expensed asset is sold for more than its UCC, the excess is recaptured into income in the year of sale. Faster deductions therefore increase the importance of tracking disposal values.
Modelling accelerated capital cost allowance
A sound investment model should run three cases: enacted law only, enacted law plus the Productivity Mega Deduction, and enacted law plus both the Mega Deduction and the building measure. For each, model:
- first-year and subsequent CCA by class, with available-for-use dates;
- the effect of investment tax credits, which reduce capital cost;
- loss utilization, given that large first-year deductions may create non-capital losses carried forward for 20 years;
- interaction with the EIFEL interest limitation, since higher CCA lowers adjusted taxable income and can reduce deductible interest;
- provincial CCA, which generally follows the federal rules, and Quebec, which has its own regime with additional incentives.
Illustration: a manufacturer acquires CAD 10 million of production equipment in October 2026. If the Productivity Mega Deduction is enacted as proposed, it could deduct the full CAD 10 million in its 2026 year. Under enacted rules alone, the equipment would likely be re-accelerated investment incentive property with an enhanced first-year deduction but not full expensing. If the company has insufficient income to use the deduction, much of the benefit would sit in loss carryforwards, so the model should test cash tax over several years rather than first-year deductions alone.
Timing rules for accelerated capital cost allowance
CCA cannot be claimed until property is "available for use" under s. 13(26) to (31) of the ITA, generally when it is first used to earn income or after a two-year rolling-start rule. Acquisition dates matter for eligibility windows: the Productivity Mega Deduction applies to property acquired on or after 15 September 2026, while re-accelerated treatment depends on acquisition after 2024 and availability before 2034. Contracts signed before a start date but closed after it, progress payments under construction contracts and assets imported in stages all need specific analysis.
Groups that acquire assets through acquisitions of companies should remember that property previously owned by a non-arm's length person is excluded from several of these measures, and that an acquisition of control can trigger a deemed year-end and loss restriction rules.
Leasing, partnerships and specified property
Lessors and investors in leasing structures face specific limits. The specified leasing property rules restrict CCA on many leased assets to an amount that approximates the principal portion of a notional loan, which prevents lessors from using fast write-offs to shelter unrelated income. Rental property rules similarly prevent CCA on rental buildings from creating or increasing a loss. Partnerships allocate CCA to partners, but the at-risk rules and the proposed loss-creation limits for individuals under the Productivity Mega Deduction will constrain tax-shelter style investments. Investors in partnerships that acquire new equipment should confirm how the partnership will claim and allocate the deductions.
Accelerated capital cost allowance in M&A and financing
In acquisitions, the buyer of shares inherits the target's UCC pools rather than receiving a cost step-up, while a buyer of assets obtains a new capital cost, subject to the rules on non-arm's length and previously owned property. Where enhanced CCA has already been claimed, the seller in an asset deal may face recapture, which affects price negotiation. Lenders also look at the tax profile: large early deductions can defer cash taxes, improving debt service capacity, but they may also limit the use of other attributes. Purchase agreements should allocate price among asset classes with these consequences in mind, and the allocation should be agreed between buyer and seller to avoid inconsistent filings.
How TRW & Co helps
We help businesses plan capital investment around accelerated capital cost allowance: classifying assets, confirming eligibility under enacted rules and proposals, structuring acquisition and construction contracts for the right dates, and modelling interactions with credits, EIFEL and losses. We work with our corporate and international tax colleagues and with project teams in our power and renewables practice. See also our insights on Budget 2026 tax measures and EIFEL interest limits. This page is general information, not legal advice. Contact us to model your investment.
Frequently asked questions
Is the Productivity Mega Deduction law?
No. It was announced on 15 September 2026 with draft legislative proposals and would apply to property acquired on or after that date. It must be enacted before it has legal effect, and the final rules may change. Businesses should model enacted law and the proposal separately.
Which assets are excluded from the proposed immediate expensing?
The proposal excludes Class 1 and 3 buildings and additions, Classes 14, 14.1 and 51, certain Class 10 and 10.1 passenger vehicles, and property under Schedules V and VI. Used property is eligible only if neither the taxpayer nor a non-arm's length person previously owned it and no rollover applied.
What is re-accelerated investment incentive property?
It is property, other than zero-emission vehicles in Classes 54 to 56, acquired after 2024 and available for use before 2034, meeting conditions about prior ownership. It receives an enhanced first-year CCA deduction, larger for property available for use before 2030.
Are manufacturing buildings eligible?
Not under the Productivity Mega Deduction, because Class 1 is excluded. Bill C-31 proposes temporary 100% expensing for eligible manufacturing or processing buildings acquired from 4 November 2025 and first used before 2030, with a later phase-down. The bill was not yet enacted in early November 2026.
Does faster CCA have downsides?
It can create losses that must be carried forward, reduce deductible interest under EIFEL by lowering adjusted taxable income, and increase recapture on a later sale. Modelling cash tax over several years, rather than first-year deductions alone, gives a truer picture.
Sources
General information only, not legal advice. References to statutes, courts and authorities describe published law and practice at the date shown.


