Locked Box vs Closing Accounts: Price Mechanisms in Canada
A locked box fixes the price at a pre-signing reference date and relies on leakage protection, while closing accounts adjust the price after closing. This guide compares both mechanisms for Canadian private M&A, from leakage and ticker interest to working capital pegs, net debt and disputes.

Key takeaways
- A locked box gives price certainty but puts interim trading risk on the buyer.
- Leakage and permitted leakage definitions do most of the protective work.
- Ticker interest allocates the cost of Competition Act and Investment Canada Act delays.
- Under closing accounts, net debt items such as deferred revenue and taxes drive disputes.
- Send accounting disputes to an expert with a clear mandate and accounting hierarchy.
Locked box or closing accounts: the short answer
A locked box fixes the price by reference to a balance sheet struck at a date before signing, and protects the buyer by prohibiting value from leaving the target between that date and closing. Closing accounts (often called completion accounts) take the opposite approach: the parties agree a headline price and then adjust it after closing once a closing balance sheet shows actual cash, debt and working capital. In Canadian private M&A, closing accounts remain the more common default, but the locked box has become familiar in auctions run by private equity sellers and on cross-border deals with European counterparties.

Neither mechanism is inherently better. A locked box gives price certainty and a cleaner exit, but shifts to the buyer the risk of performance between the reference date and closing. Closing accounts give the buyer a price that reflects what it actually receives, at the cost of a post-closing process that can be slow and contentious. The right choice depends on the quality of the target's historical accounts, the time between the reference date and closing, the parties' bargaining power and the likelihood of regulatory delay.
How a locked box works
The mechanism has four building blocks.
- The reference balance sheet. The price is calculated from accounts at a locked box date, ideally audited or at least reviewed. The buyer conducts financial due diligence on those accounts before signing, because there is no later adjustment.
- The leakage covenant. From the reference date to closing, the seller undertakes that no value will leak out of the target to the seller or its affiliates.
- Permitted leakage. Specified payments that the buyer has priced in, such as salaries in the ordinary course or an agreed management fee, are carved out.
- The leakage indemnity. The seller reimburses any leakage, dollar for dollar, usually within a limited claims period after closing.
Because the buyer cannot adjust the price for poor trading, the reference accounts must be reliable and recent. A long gap between the reference date and closing increases the buyer's exposure and, as discussed below, the seller's argument for a ticker.
Defining leakage and permitted leakage
The leakage definition does most of the protective work in a fixed-price deal. A typical definition captures:
- dividends, distributions, share redemptions and returns of capital;
- payments to the seller or its affiliates, including management, monitoring or advisory fees;
- transfers of assets to, or assumption of liabilities for, the seller group at less than market value;
- waivers or forgiveness of amounts owed by the seller group;
- transaction bonuses, sale-related fees and the seller's deal costs borne by the target; and
- taxes triggered by any of the above.
Permitted leakage should be listed specifically, with amounts or caps. Ordinary-course payments to employees who are also shareholders, intercompany trading on arm's length terms and pre-agreed dividends are common examples. Vague permitted-leakage language ("payments in the ordinary course") undermines the whole structure.
Leakage claims are claims for a debt-like sum rather than for damages, and they are usually subject to a short claims window. In Ontario, s. 22 of the Limitations Act, 2002 allows parties to a business agreement to vary or exclude most limitation periods, so the agreement should state clearly whether the leakage claims period replaces the statutory two-year period.
Ticker interest and the economics of time
Under this structure the buyer receives the economic benefit of the target's profits from the locked box date, but the seller does not receive the price until closing. Sellers therefore often ask for a "ticker": a daily amount, or interest at an agreed rate on the equity price, payable from the reference date (or a later date) to closing.
Buyers push back on tickers where the target is not generating cash, where closing is delayed for reasons within the seller's control, or where the ticker rate is higher than the target's actual earnings. Common compromises include a ticker that starts only after a fixed period or after a regulatory filing, and a cap on the total.
Regulatory timing is especially important in Canada. A notifiable merger cannot close until the waiting period under s. 123 of the Competition Act expires or is waived. The Competition Bureau's merger review overview explains that the initial waiting period is 30 days after a complete notification, and that a supplementary information request extends the period until 30 days after compliance. A reviewable investment under the Investment Canada Act adds a net benefit review with an initial 45-day period that can be extended, and the ICA thresholds for 2026 determine whether review is required. A fixed-price deal with a ticker running through a long review can transfer significant value to the seller.
How closing accounts work: working capital pegs and net debt
Under closing accounts, the price is typically expressed as an enterprise value adjusted for cash, debt and working capital at closing. The working capital adjustment compares actual closing working capital against a "peg", usually the normalized average of the target's working capital over a trailing period, adjusted for seasonality. A peg set too low hands the seller a windfall; set too high, it takes value from the seller.
The net debt definition generates more disputes than any other item. Canadian buyers routinely negotiate to include as debt-like items:
| Item | Buyer's position | Seller's position |
|---|---|---|
| Deferred revenue | Debt-like: cash received for services the buyer must deliver | Working capital item already reflected in the peg |
| Accrued and unpaid income taxes | Debt, including taxes for pre-closing periods not yet due | Only taxes payable at closing |
| Unpaid bonuses and severance | Debt, including employer payroll taxes | Ordinary course; part of working capital |
| Capital leases and deferred capex | Debt-like | Operating items |
| Customer deposits and government assistance repayable | Debt | Case by case |
The key is consistency: an item should be counted either in working capital or in debt, never in both and never in neither. The agreement should include an illustrative closing statement prepared on the agreed accounting principles.
Comparing the locked box with closing accounts
| Issue | Locked box | Closing accounts |
|---|---|---|
| Price certainty at signing | High | Lower; final price known months after closing |
| Risk of trading between reference date and closing | Buyer | Seller (through working capital and net debt adjustments) |
| Diligence burden | Front-loaded on reference accounts | Spread between pre-signing and post-closing review |
| Post-closing disputes | Limited to leakage | Common: working capital, net debt, accounting policies |
| Fit for carve-outs | Difficult without stand-alone accounts | Usually better |
| Regulatory delay | Ticker allocates time value | No direct effect on price |
A locked box tends to suit stable, cash-generative businesses with good audited accounts and short timetables. Closing accounts tend to suit carve-outs, businesses with volatile working capital and deals with long regulatory timelines. Hybrid structures also exist, such as a fixed price with a limited working capital true-up.
Negotiating the price mechanism in practice
In a sell-side auction, the seller usually decides the mechanism and circulates a draft agreement that reflects it. Bidders then compete on headline price and on mark-up. A bidder that accepts the seller's mechanism without material changes signals deal certainty; a bidder that insists on switching from a fixed price to closing accounts must usually offer something in return, such as a higher price or a faster timetable.
In a bilateral negotiation, the choice is more open, and the parties often decide based on practical factors:
- Quality of the reference accounts. If the most recent audited accounts are more than six months old, or the target has never been audited on a stand-alone basis, buyers will be reluctant to fix the price.
- Seasonality. A business whose working capital swings sharply during the year is easier to price with a peg and a true-up.
- Integration of the target within a seller group. Intercompany balances, shared services and cash pooling make leakage harder to police and closing accounts easier to justify.
- Financing. Lenders to the buyer will want to understand the maximum purchase price at closing. A fixed price helps, but an uncapped ticker can cut the other way.
- Tax. Pre-closing tax liabilities and refunds should be allocated expressly, whether through net debt or through a tax indemnity, so that they are not caught twice or missed entirely.
Whichever mechanism is chosen, the parties should align the price clause with the representations, covenants and indemnities. For example, an interim covenant to operate in the ordinary course protects the buyer under either mechanism, but its breach is remedied differently: through leakage or damages under a fixed price, and through the price adjustment and damages under closing accounts.
Dispute mechanics
For closing accounts, the agreement should set a clear timetable: the buyer prepares the closing statement within a fixed period; the seller receives access to books, records and personnel; the seller delivers a notice of disagreement itemizing disputed amounts; the parties negotiate for a fixed period; and unresolved items go to an independent accountant acting as an expert, not as an arbitrator. The expert's mandate should be confined to the disputed items, with the determination binding absent manifest error.
Specify a hierarchy of accounting principles: first, specific policies listed in the agreement; second, the target's historical practices, consistently applied; third, the applicable accounting framework. Without that hierarchy, the expert may have to choose between conflicting principles, and each party will argue for the one that favours it.
For a fixed-price deal, dispute mechanics are simpler but should still cover how leakage is identified, whether the buyer may set leakage claims off against any deferred consideration, and whether claims survive beyond the general survival period. Where representations and warranties insurance is in place, leakage is usually excluded from cover, so the seller's direct indemnity must be meaningful.
Illustration (hypothetical): A seller agrees a fixed CAD 120 million price based on accounts at 31 March. Between that date and the 30 September closing, the target pays CAD 1.5 million in management fees to the seller's parent. If management fees are not listed as permitted leakage, the seller must repay the full CAD 1.5 million after closing, regardless of how well the business traded in the interim.
Had the same deal used closing accounts, the management fees would simply have reduced closing cash or increased closing liabilities, and the price would have adjusted automatically. The difference is not the economic outcome but the route to it: a direct claim against the seller under one mechanism, an accounting adjustment under the other. Buyers should consider whether the seller will still have assets to meet a leakage claim after distributing the proceeds, and ask for an escrow or a parent guarantee where it will not.
How TRW & Co helps
We advise buyers and sellers on price mechanisms in Canadian private acquisitions, including the choice between a locked box and closing accounts, leakage and net debt definitions, working capital pegs, ticker provisions and expert determination clauses. We coordinate with financial due diligence providers so that the legal definitions match the numbers, and we act in post-closing price disputes, working with Canadian counsel where a provincial licence is required. See also our pages on mergers and acquisitions, private equity and merger review, and our insights on earnout provisions and representations and warranties insurance. To discuss a deal, contact us.
Frequently asked questions
Is a locked box common in Canada?
Closing accounts remain the usual default in Canadian private M&A, but the locked box is now familiar, particularly in auctions run by private equity sellers and in cross-border deals with European parties. It works best for stable businesses with reliable recent accounts and a short timetable to closing.
What counts as leakage?
Leakage typically includes dividends, returns of capital, payments and fees to the seller or its affiliates, transfers of value to the seller group, waivers of seller debts, transaction bonuses and seller deal costs borne by the target, and related taxes. Anything the buyer agreed to in advance should be listed as permitted leakage.
Does a regulatory review affect a locked box deal?
Yes. The buyer bears trading risk from the locked box date, and the seller waits longer for its money. A ticker can compensate the seller, but a long Competition Act or Investment Canada Act review can make a ticker expensive. Parties often defer the ticker start date or cap it.
Why is deferred revenue so contentious?
Deferred revenue represents cash already received for services the buyer will have to deliver after closing. Buyers argue it is debt-like; sellers argue it is a working capital item already reflected in the peg. The agreement should treat it one way consistently and show the treatment in an illustrative statement.
Sources
General information only, not legal advice. References to statutes, courts and authorities describe published law and practice at the date shown.


