PFAS Regulation in Canada
PFAS regulation in Canada is shifting to a class-based approach. In March 2025 the federal government found the PFAS class, other than fluoropolymers, meets CEPA’s toxicity criteria and proposed a phased plan starting with firefighting foams. This guide explains the timeline, reporting duties, drinking water objectives and what businesses should do now.

Key takeaways
- In March 2025 Canada concluded the PFAS class, excluding fluoropolymers, meets CEPA s. 64 criteria.
- Listing on Schedule 1 does not itself restrict PFAS; regulations under CEPA are needed.
- Phase 1 would phase out PFAS in firefighting foams, not before spring 2029 on the planned timeline.
- Health Canada’s drinking water objective is 30 ng/L for the sum of 25 specific PFAS.
- Companies should inventory PFAS in products and supply chains ahead of Phase 2 in 2027.
Where PFAS regulation in Canada stands in 2026
PFAS regulation in Canada is moving from a substance-by-substance approach to a class-based one. Per- and polyfluoroalkyl substances, often called "forever chemicals", are a group of thousands of synthetic chemicals used in firefighting foams, coatings, textiles, packaging, electronics and industrial processes. A few, such as PFOS and PFOA, have been restricted in Canada for years.
In March 2025 the federal government concluded that the PFAS class as a whole, other than fluoropolymers, meets the criteria for being "toxic" under the Canadian Environmental Protection Act, 1999 (CEPA), proposed adding the class to Schedule 1, and set out a phased risk management approach. Firefighting foams are first, with regulations not expected to come into force before spring 2029. Businesses that make, import or use PFAS-containing products should be mapping their supply chains now.

This note explains the CEPA framework, the class assessment and proposed listing, the phased approach to prohibitions, data-gathering under s. 71, drinking water objectives and practical steps for companies. It reflects federal documents published up to the date of writing; it is general information and not legal advice.
The CEPA framework
CEPA allows the federal government to assess substances and, if they meet the criteria in s. 64, to add them to the List of Toxic Substances in Schedule 1. A Schedule 1 listing enables regulations under s. 93 controlling manufacture, use, sale, import, release and labelling. Importantly, listing does not by itself prohibit anything: as the government's consultation document notes, adding a substance to Schedule 1 does not in itself restrict its use, manufacture or import. Restrictions come through regulations, which require their own consultation and publication in the Canada Gazette. CEPA also allows other instruments, such as pollution prevention plans, codes of practice and labelling requirements, which can be used alongside or instead of prohibitions for particular uses.
Some PFAS are already regulated. PFOS, PFOA and long-chain perfluorocarboxylic acids, their salts and precursors are subject to prohibitions under the Prohibition of Certain Toxic Substances Regulations, with limited exemptions. The class-based approach is designed to prevent "regrettable substitution", where a restricted PFAS is replaced by another PFAS with similar properties and risks.
The class assessment and proposed listing
On 8 March 2025, the government published its final State of PFAS Report, which concluded that the class of PFAS meets one or more of the criteria in s. 64 of CEPA, together with a proposed Order adding the class to Part 2 of Schedule 1 and a Risk Management Approach. Fluoropolymers are excluded from the class as defined in the report. The comment periods on the proposed Order and the Risk Management Approach closed on 7 May 2025, and the government indicated that comments would be taken into account in finalizing the Order. Companies should check whether the final Order has been published in Canada Gazette Part II before relying on its terms.
| Step | Date | Status and effect |
|---|---|---|
| Section 71 notice on certain PFAS | July 2024 | Mandatory information gathering on baseline uses and quantities |
| Drinking water objective | 9 August 2024 | Health Canada objective of 30 ng/L for the sum of 25 specific PFAS |
| State of PFAS Report and proposed Schedule 1 Order | 8 March 2025 | Class (excluding fluoropolymers) meets s. 64 criteria; comments closed 7 May 2025 |
| Phase 1 consultation (firefighting foams) | 26 September 2025 | Proposed prohibition of non-regulated PFAS in foams; comments closed 25 November 2025 |
| Proposed Phase 1 regulations | Spring 2027 (planned) | Canada Gazette Part I, with at least 60 days for comment |
| Phase 1 in force | Not before spring 2029 (planned) | Transition periods of 18 months to 6 years depending on sector |
| Phase 2 consultation | 2027 (anticipated) | Uses not needed for health, safety or the environment, focusing on consumer products |
The phased approach to prohibitions
The Risk Management Approach proposes three phases. According to the government's Phase 1 consultation document (26 September 2025):
- Phase 1 would prohibit PFAS not currently regulated in firefighting foams, such as C6 aqueous film-forming foams, leading to a complete phase-out of PFAS in firefighting foams;
- Phase 2 would prohibit uses of PFAS that are not needed to protect health, safety or the environment, focusing on consumer applications where alternatives exist, with consultations anticipated in 2027;
- Phase 3 would consider prohibitions for uses that need further evaluation of the role PFAS play.
For Phase 1, the government proposed new regulations prohibiting the manufacture, use, sale and import of non-regulated PFAS in firefighting foams, with transition periods of 18 months for portable extinguishers and municipal fire services, three years for civilian aviation and other industries, and six years for civilian ships, defence, offshore oil and gas and high-hazard facilities. It did not propose exemptions for training use. On the planned timeline, the instrument is not expected to come into force before spring 2029.
Owners of fire suppression systems at airports, refineries, terminals, warehouses and industrial sites should inventory their foams now. Replacing systems, disposing of existing stocks and cleaning equipment take time and capital, and transition periods start to run when the regulations come into force.
Mandatory information gathering under s. 71
Section 71 of CEPA allows the Minister to require persons to provide information about substances they manufacture, import or use. In July 2024 the government published a s. 71 notice in Canada Gazette Part I concerning certain PFAS, which gathered baseline data on manufacture, import and use. Responses to such notices are mandatory for those meeting the reporting criteria, and failure to respond is an offence. The information collected will inform Phase 2 and Phase 3 measures, so the quality of a company's response can influence how its uses are characterized.
Future notices are likely as the government moves through the phases. Companies that import PFAS in mixtures or manufactured items often find it difficult to answer because suppliers do not disclose formulations. Building supplier declarations into contracts now will make future responses easier and more accurate. Where suppliers will not disclose formulations for confidentiality reasons, contracts can require them to report directly to the regulator or to an independent third party, or at least to confirm whether intentionally added PFAS are present above defined thresholds.
Drinking water and site contamination
Health Canada published an objective for Canadian drinking water quality on 9 August 2024: 30 ng/L for the sum total of 25 specific PFAS. An objective is used while a guideline is revised or developed, and it is implemented by provinces and territories, which regulate drinking water. Provincial adoption, monitoring obligations and treatment requirements vary, so municipalities and private water system operators should check their provincial rules.
PFAS contamination of soil and groundwater, especially at sites where firefighting foams were used, is a growing liability issue. Provincial contaminated sites regimes can impose remediation orders on current and past owners and operators, and civil claims by neighbours or water utilities are possible. In real estate and M&A, environmental site assessments increasingly include PFAS sampling, and purchase agreements allocate PFAS risk expressly. See our note on environmental offences and director liability for enforcement exposure.
Supply chain inventories and product compliance
Because PFAS regulation will expand to consumer and industrial uses in later phases, businesses should map where PFAS appear in their products and processes. Typical sources include water- and stain-repellent textiles, food packaging, cookware, cosmetics, electronics, lubricants, hydraulic fluids, semiconductors and coatings. A practical inventory identifies each product or component that may contain PFAS, the supplier, the function the PFAS performs, the availability of alternatives and the regulatory status in Canada and in other markets the company serves.
Companies operating in several jurisdictions should also track foreign measures, because restrictions in the United States, the European Union and elsewhere will affect supply chains that serve Canada. Contracts with suppliers should require disclosure of intentionally added PFAS, cooperation with regulatory reporting and notice of reformulation. Consumer-facing companies should be careful with "PFAS-free" claims, which must be accurate and substantiated under the Competition Act; see our page on deceptive marketing and greenwashing.
Provincial PFAS regulation and enforcement
Federal measures are only part of the picture. Provinces regulate drinking water, contaminated sites, waste disposal and industrial discharges, and several have begun to address PFAS within those regimes. Provincial environmental agencies can require sampling of discharges or groundwater, set site-specific remediation standards and impose conditions in approvals for landfills, wastewater treatment plants and industrial facilities. Because federal PFAS regulation focuses on products and uses, while provinces control releases and cleanup, a company's compliance programme needs to address both levels.
Waste management deserves particular attention. Disposal of PFAS-containing foams, sludges and contaminated soils may be restricted, and landfill operators may refuse such waste or impose surcharges. Planning disposal pathways early, before Phase 1 transition periods begin to run, avoids being caught without a lawful outlet for stocks that must be removed from service.
Litigation and disclosure risk
Outside Canada, PFAS contamination has generated very large lawsuits against manufacturers and users, and similar claims are possible here through class actions, nuisance and negligence claims and claims by municipalities or water utilities for treatment costs. Canadian courts have certified environmental class actions in other contexts, and the evolving science on PFAS health effects will be central to any such case. Companies should assess historic use, document their compliance with PFAS regulation as it develops and review insurance coverage, since many policies exclude pollution or specific chemicals.
Listed companies may also need to consider securities disclosure where PFAS liabilities or phase-out costs are material. Boards should ask management for a clear picture of where PFAS appear in the business, the cost of substitution and the potential remediation exposure.
PFAS regulation checklist
- Inventory PFAS in products, processes and fire suppression systems.
- Confirm whether any existing prohibitions on PFOS, PFOA or long-chain PFCAs apply.
- Track the final Schedule 1 Order and Phase 1 regulations in the Canada Gazette.
- Prepare for future s. 71 notices with supplier declarations and data systems.
- Assess PFAS contamination risk at owned and acquired sites.
- Review marketing claims about PFAS content.
- Plan lawful disposal routes for foams and contaminated materials before transition periods start.
Because PFAS regulation will continue to evolve over several years, assign responsibility for monitoring developments to a named person. Our environmental and climate page discusses federal and provincial environmental regulation more broadly.
How TRW & Co helps
We advise manufacturers, importers, retailers, airports, industrial operators and investors on PFAS regulation in Canada. We assess the impact of the proposed class listing and phased prohibitions, prepare responses to s. 71 notices and consultations, build supplier disclosure provisions into contracts, review product claims and allocate PFAS contamination risk in transactions. Where a matter requires a lawyer licensed in a particular province, we work with local counsel. To discuss your exposure, contact us.
Frequently asked questions
Are PFAS banned in Canada?
Not as a class. PFOS, PFOA and long-chain PFCAs are already subject to prohibitions with limited exemptions. For the broader class, Canada proposed adding PFAS other than fluoropolymers to Schedule 1 of CEPA in March 2025 and plans phased prohibitions, starting with firefighting foams, through regulations that are not expected in force before spring 2029.
What does a Schedule 1 listing mean?
It means the government has concluded the substance meets CEPA’s criteria for toxicity and can make regulations controlling it. Listing does not itself restrict use, manufacture or import; prohibitions or other controls require separate regulations, which are consulted on and published in the Canada Gazette.
What are the transition periods for firefighting foams?
The Phase 1 consultation proposed 18 months for portable extinguishers and municipal fire services, three years for civilian aviation and other industries, and six years for civilian ships, defence, offshore oil and gas and high-hazard facilities, with no exemption for training use. Final regulations may differ.
Is there a PFAS limit for drinking water in Canada?
Health Canada set an objective of 30 ng/L for the sum of 25 specific PFAS on 9 August 2024. It is an objective rather than a guideline and is implemented by provinces and territories, which regulate drinking water and decide monitoring and treatment requirements.
Do companies have to report PFAS use?
They may. Under s. 71 of CEPA, the Minister can require information from persons who manufacture, import or use substances. A notice on certain PFAS was published in July 2024, and more are likely. Responses are mandatory for those meeting the criteria, so supply chain data should be collected in advance.
Sources
General information only, not legal advice. References to statutes, courts and authorities describe published law and practice at the date shown.


