Skip to content
Energy, Mining & Environment

Plastics Regulation: Toxic Listing, Registry and Bans

Plastics regulation in Canada now stands on firmer ground. The Federal Court of Appeal restored the CEPA toxic listing of plastic manufactured items in January 2026, keeping the single-use plastics bans in place, and producers must report plastic placed on the market to the Federal Plastics Registry. Here is what applies and what is coming.

Plastic packaging on a sorting line, illustrating plastics regulation, the federal registry and single-use bans

Key takeaways

  • The Federal Court of Appeal reversed 2023 FC 1511 and upheld the toxic listing in 2026 FCA 17.
  • Six categories of single-use plastics are prohibited under SOR/2022-138, in force in stages from December 2022.
  • Federal Plastics Registry reporting began in September 2025 on 2024 data under a CEPA s. 46 notice.
  • Producers handling under 1,000 kg per year are exempt from registry reporting.
  • Labelling and recycled content rules are under development and recyclability claims must be substantiated.

Federal plastics regulation in Canada: the state of play

Federal plastics regulation in Canada rests on three pillars. The first is the 2021 order listing "plastic manufactured items" as toxic under the Canadian Environmental Protection Act, 1999 (CEPA), which gives the government power to regulate them. The second is the Single-use Plastics Prohibition Regulations, which ban six categories of single-use items. The third is the Federal Plastics Registry, a mandatory reporting system that requires producers to disclose the plastic they put on the Canadian market. The legal foundation was put in doubt when the Federal Court quashed the toxic listing in 2023, but in January 2026 the Federal Court of Appeal reversed that decision and restored the order. Producers, retailers and importers now face a stable legal basis for current rules and a pipeline of further measures.

Plastic packaging on a sorting line, illustrating plastics regulation, the federal registry and single-use bans
Plastics regulation in Canada combines a CEPA toxic listing, bans on single-use items and mandatory reporting to the Federal Plastics Registry.

This note explains the litigation, the prohibitions and their timelines, the registry's reporting obligations and the further measures under discussion, such as labelling and recycled content. It reflects primary sources reviewed in November 2026 and is general information, not legal advice.

The toxic listing and the litigation

In 2021 the federal government added "plastic manufactured items" to Schedule 1 of CEPA. Industry participants challenged the listing, arguing that the category was too broad and that the government had not shown that all plastic manufactured items were harmful. In Responsible Plastic Use Coalition v. Canada (Environment and Climate Change), 2023 FC 1511, the Federal Court agreed, finding the listing unreasonable and unconstitutional, a result that cast doubt on the regulations built on it.

The government appealed. In Canada (Attorney General) v. Responsible Plastic Use Coalition, 2026 FCA 17 (30 January 2026), the Federal Court of Appeal allowed the appeal and dismissed the application for judicial review. Applying Vavilov and Auer v. Auer, 2024 SCC 36, the Court concluded that the decisions of the Governor in Council and the Minister were reasonable. The listing therefore stands, and with it the authority for the single-use plastics prohibitions and other measures, subject to any further appeal to the Supreme Court of Canada. For more on the standard of review, see our note on the Vavilov framework.

The Single-use Plastics Prohibition Regulations

The Single-use Plastics Prohibition Regulations (SOR/2022-138) were registered on 20 June 2022. They prohibit the manufacture, import and sale of six categories of single-use plastic items, subject to defined exceptions: checkout bags, cutlery, foodservice ware made from or containing problematic plastics, ring carriers, stir sticks and straws (with limited exceptions for flexible straws, such as for people with disabilities and in health care settings). The definitions are technical; for example, a checkout bag made of fabric plastic is caught if it breaks or tears when used to carry 10 kg over 53 m 100 times or after a single domestic wash under ISO 6330.

The regulations came into force in stages calculated from registration: most provisions six months after registration (December 2022), the prohibition on sale 18 months after registration (December 2023), and remaining provisions affecting manufacture and import for export 42 months after registration (December 2025). Businesses that manufacture or import items for export must keep records under s. 8 for the periods that apply. Because the definitions turn on composition and performance, product testing and supplier certifications are important evidence of compliance.

MeasureLegal basisKey datesWho is affected
Toxic listing of plastic manufactured itemsCEPA Schedule 1 order (2021)Quashed 2023 FC 1511; restored 2026 FCA 17 (30 Jan 2026)Everyone subject to plastics measures under CEPA
Single-use plastics prohibitionsSOR/2022-138Registered 20 June 2022; staged in force December 2022, December 2023 and December 2025Manufacturers, importers, retailers, foodservice businesses
Federal Plastics RegistryCEPA s. 46 notice (20 April 2024), amended 14 March 2026Phase 1 reporting from September 2025 on 2024 data; annual reports on 2025 and 2026 dataProducers of packaging, electrical and electronic equipment and single-use products
Labelling and recycled contentProposed CEPA instrumentsUnder developmentBrand owners, packaging suppliers

The Federal Plastics Registry

The registry is built on a notice under s. 46(1) of CEPA, published in Canada Gazette Part I on 20 April 2024 for reporting on 2024, 2025 and 2026. According to the government's Federal Plastics Registry page (modified 27 October 2026), Phase 1 reporting started in September 2025 and requires producers who manufacture, import or place on the market plastic packaging, electrical and electronic equipment, and single-use or disposable plastic products to report the plastic placed on the market for the 2024 calendar year, with further reports on 2025 and 2026 data. Producers and service providers handling less than 1,000 kg per year are exempt.

The government amended the notice on 14 March 2026. Resin manufacturers, waste generators and service providers are not required to report for 2025 and 2026, and reporting beyond 2027 will be set out in a future information-gathering notice. Responses to s. 46 notices are mandatory for those who meet the criteria, and providing false or misleading information is an offence. Companies should keep their methodology and source data, since the registry information is expected to inform future regulation and extended producer responsibility programmes.

Practical point

Who counts as the "producer" for reporting purposes depends on the category and on whether the brand owner, importer or first seller is resident in Canada. Agree in distribution and supply contracts which party will report and how data will be shared, so that reports are complete and consistent with provincial extended producer responsibility filings.

What the appeal decision means for future measures

The Federal Court of Appeal's reasoning matters beyond the single-use ban. By upholding the listing of a broad category of items, the Court confirmed that the government can address plastic pollution through CEPA using a category-based listing, provided its decisions are reasonable in light of the evidence and the statute. Future regulations made under the listing will still be open to challenge on their own terms, for example if a specific prohibition lacks an evidentiary basis or goes beyond what the statute authorizes. Industry participants should therefore engage closely with consultations and build a record during the regulatory process, since that record is what a court will review.

Labelling, recycled content and what comes next

The federal government has consulted on further instruments under the plastics agenda, including rules on recyclability and compostability labelling, minimum recycled content requirements for certain products and packaging, and measures for specific sectors. These remain under development, and their timing has shifted with the litigation. Brand owners should treat them as likely and plan packaging redesign cycles accordingly. Recyclability claims in the meantime are subject to the Competition Act's rules against false or misleading representations, discussed on our greenwashing page.

Provinces regulate waste diversion and producer responsibility. Federal plastics regulation and provincial extended producer responsibility rules interact closely: the federal registry collects data on the same products for which producers pay provincial collection and recycling costs. Our note on extended producer responsibility in Ontario, Quebec and BC explains those obligations.

Enforcement of plastics regulation

Enforcement of the single-use prohibitions and registry obligations follows CEPA's general framework: inspections, warnings, environmental protection compliance orders, administrative penalties where available and prosecution. Directors and officers have a duty under s. 280.1 of CEPA to take all reasonable care to ensure compliance, so boards of companies in packaging, foodservice and retail should ensure that compliance responsibilities are assigned and monitored; see our note on environmental offences and director liability.

Common compliance gaps include imported items that fall within a prohibited category because of their composition, inventory of prohibited items sold after the relevant date, inaccurate claims that items are compostable or recyclable, and incomplete registry reports for products sold through online marketplaces. A simple compliance map, product by product, is usually the most efficient way to close these gaps.

Imports, online marketplaces and cross-border supply

Much of the plastic covered by federal plastics regulation enters Canada as packaging around imported goods or as finished products sold online. Importers of record are directly responsible for compliance with the import prohibitions, and the Canada Border Services Agency can detain non-compliant goods. Foreign sellers using fulfilment services or marketplaces in Canada may find that the Canadian entity that first places the product on the market is treated as the producer for reporting purposes. Marketplaces themselves are increasingly asked by regulators and by provincial producer responsibility organizations to help identify sellers and data.

For multinational groups, the practical answer is to decide which entity will act as importer and producer in Canada, to give that entity the data it needs, and to reflect the arrangement in intra-group agreements. Where a third-party distributor takes on that role, the distribution agreement should allocate compliance costs, reporting duties, indemnities and audit rights. Customs classification and country-of-origin documentation should be checked at the same time, because tariff treatment of plastics and packaging has become more volatile.

Planning for the next wave of plastics regulation

Federal plastics regulation is designed to tighten over time. The registry data will give the government a detailed picture of plastic flows by product category and producer, and that picture is likely to drive future measures, from recycled content requirements to performance standards and further prohibitions. Companies that use the registry process to build accurate internal data will be better placed to comment on proposals, model costs and redesign packaging before rules are finalized.

Packaging redesign cycles are long. Changing materials can affect food safety approvals, shelf life, transport costs and machinery, and new materials must be checked against both federal and provincial rules. A practical approach is to identify the packaging formats most exposed to regulatory change, test alternatives early and build regulatory milestones into product roadmaps. Procurement teams should also ask suppliers about their own plans for recycled content and recyclability, since supplier capacity will determine how quickly changes can be made at scale.

Plastics regulation checklist

  • Classify products against the six prohibited categories and their technical definitions.
  • Retain supplier certifications and test results supporting compliance.
  • Confirm registry reporting obligations, the reporting entity and deadlines for each year.
  • Align federal registry data with provincial EPR reports.
  • Review recyclability and compostability claims for substantiation.
  • Monitor further federal instruments on labelling and recycled content.

How TRW & Co helps

We advise manufacturers, importers, retailers, foodservice companies and brand owners on plastics regulation in Canada. We classify products under the prohibitions, prepare registry reporting strategies, allocate reporting and compliance responsibilities in supply and distribution contracts, review environmental claims and respond to inspections and enforcement. Where a matter requires a lawyer licensed in a particular province, we work with local counsel. To discuss your obligations, contact us; our retail and consumer page covers related issues.

Frequently asked questions

Is the federal single-use plastics ban still in force?

Yes. The Federal Court quashed the underlying toxic listing in 2023 FC 1511, but on 30 January 2026 the Federal Court of Appeal allowed the government’s appeal in 2026 FCA 17, finding the listing reasonable. The Single-use Plastics Prohibition Regulations therefore remain in force, subject to any further appeal.

Which single-use plastics are banned?

The regulations cover checkout bags, cutlery, foodservice ware made from or containing problematic plastics, ring carriers, stir sticks and straws, with limited exceptions such as flexible straws for people with disabilities. Each category has a technical definition, so composition and performance must be checked product by product.

Who must report to the Federal Plastics Registry?

Under the CEPA s. 46 notice of 20 April 2024, as amended on 14 March 2026, producers that manufacture, import or place on the market plastic packaging, electrical and electronic equipment and single-use or disposable plastic products must report, unless they handle less than 1,000 kg per year. Phase 1 reporting began in September 2025.

Are resin manufacturers required to report?

According to the government’s registry page, resin manufacturers, waste generators and service providers are not required to report for 2025 and 2026. Reporting beyond 2027 will be set out in a future information-gathering notice, so these entities should monitor the Canada Gazette.

What are the risks of recyclability claims?

Claims that packaging is recyclable or compostable must be accurate and substantiated under the Competition Act’s rules against false or misleading representations, and federal labelling rules are under development. Companies should check claims against actual collection and processing capacity in the markets where products are sold.

Sources

  1. Canada (Attorney General) v. Responsible Plastic Use Coalition, 2026 FCA 17
  2. Single-use Plastics Prohibition Regulations (SOR/2022-138)
  3. ECCC — Federal Plastics Registry (modified 27 Oct 2026)

General information only, not legal advice. References to statutes, courts and authorities describe published law and practice at the date shown.