Extended Producer Responsibility in Ontario, Quebec and BC
Extended producer responsibility makes brand owners, importers and retailers pay for collecting and recycling the packaging and products they sell. Ontario completed its blue box transition at the end of 2025, Quebec is phasing in a modernized deposit system through 2027 and British Columbia runs stewardship plans for many categories. Here is how each regime works.

Key takeaways
- EPR is provincial: Ontario, Quebec and BC each define producers and obligations differently.
- Ontario’s blue box transition ran from 1 July 2023 to 31 December 2025 under O. Reg. 391/21.
- Quebec extended its deposit to plastic beverage containers on 1 March 2025; wine bottles follow in 2027.
- BC producers must operate or join approved stewardship plans under the Recycling Regulation.
- Contracts should state who is the producer, who reports and how EPR fees are passed through.
What extended producer responsibility requires in Canada
Extended producer responsibility (EPR) makes the businesses that put products and packaging on the market responsible for collecting and recycling them at end of life. In Canada, EPR is provincial, and the three largest programmes, in Ontario, Quebec and British Columbia, now cover packaging and paper, beverage containers, electronics, batteries, tires and other products. Obligations include registering with a regulator, reporting the quantities supplied, joining or forming a producer responsibility organization, financing collection and meeting recovery targets. Penalties for non-compliance can be significant. For brand owners, importers, retailers and e-commerce sellers, the first question is which entity in the supply chain is the "producer" in each province, because the answer differs and the obligations follow it.

This note covers the main regimes in Ontario, Quebec and British Columbia, the categories of products covered, how producers are identified, and practical points for compliance and contracts. It is general information based on sources reviewed in November 2026, not legal advice.
Extended producer responsibility at a glance
| Province | Framework | Main product categories | Recent milestones |
|---|---|---|---|
| Ontario | Resource Recovery and Circular Economy Act, 2016 (RRCEA); regulations administered by the Resource Productivity and Recovery Authority | Blue box (packaging and paper), electrical and electronic equipment, batteries, tires, hazardous and special products | Blue box transition period ran from 1 July 2023 to 31 December 2025; full producer responsibility thereafter |
| Quebec | Environment Quality Act and regulations on deposit-refund and selective collection; designated management bodies | Beverage containers (deposit), containers, packaging and printed paper (selective collection), electronics, batteries, paints, oils and others | Modernized deposit system: phase 1 on 1 November 2023, phase 2 on 1 March 2025, phase 3 on 1 March 2027 |
| British Columbia | Recycling Regulation under the Environmental Management Act | Packaging and paper, beverage containers, electronics, batteries, tires and other product categories | Product categories added over time through regulation amendments and stewardship plans |
Ontario: individual producer responsibility under the RRCEA
Ontario's approach under the Resource Recovery and Circular Economy Act, 2016 makes individual producers legally responsible for meeting collection and management requirements, though they usually discharge them by contracting with producer responsibility organizations. The Resource Productivity and Recovery Authority (RPRA) operates the registry, receives reports, audits and enforces. Separate regulations apply to each material category: the blue box regulation for packaging and printed paper, and regulations for electrical and electronic equipment, batteries, tires and hazardous and special products.
The Blue Box regulation (O. Reg. 391/21) moved responsibility for residential recycling from municipalities to producers in stages. The regulation defines the "transition period" as the period beginning on 1 July 2023 and ending on 31 December 2025, during which communities moved onto the producer-run system according to a transition schedule. From 1 January 2026, producers are responsible for the collection system across eligible sources province-wide, and for meeting management targets by material category. The regulation was amended in 2025, so producers should work from the current consolidation.
Who is the producer in Ontario?
Ontario's regulations use a hierarchy. For a branded product, the brand holder resident in Canada is usually the producer; if there is none, the importer; and if there is no importer, the retailer or, for online sales, the marketplace facilitator or seller as defined. The details vary by regulation. Because the hierarchy can make a Canadian retailer or distributor the producer for products of foreign brand owners, contracts should allocate responsibility and costs clearly.
Quebec: modernized deposit and selective collection
Quebec has long had a deposit-refund system for beer and soft drink containers and EPR programmes for several product categories. It has modernized both. The deposit-refund system is now managed by a designated management body and is being expanded in phases. According to the Quebec environment ministry's deployment timeline:
- on 1 November 2023 (phase 1), the deposit was standardized at 10 cents, except glass containers of 500 ml to 2 L (25 cents), aluminium cans of 100 ml to 2 L were added, and retailers with more than 375 m² of sales area must take back and refund containers;
- on 1 March 2025 (phase 2), the deposit was extended to all other ready-to-drink plastic beverage containers of 100 ml to 2 L, such as water and juice bottles;
- on 1 March 2027 (phase 3), it is to extend to all other ready-to-drink beverage containers of 100 ml to 2 L, including wine and spirits bottles and multilayer milk and juice cartons.
In parallel, Quebec's selective collection (curbside recycling) system for containers, packaging and printed paper is being transferred to producers through a designated management body, with producers financing and managing the system. Quebec's EPR regulations for electronics, batteries, paints, oils and other products continue to apply, and new categories have been added over time.
Quebec's deposit system affects product design and logistics as well as fees: containers must carry the deposit marking, retailers must accept returns, and producers must register with the management body. Brand owners launching new beverage formats should check deposit status before finalizing packaging.
British Columbia: stewardship plans under the Recycling Regulation
British Columbia was an early adopter of extended producer responsibility. Under the Recycling Regulation, made under the Environmental Management Act, producers of designated products must operate, or belong to an agency that operates, an approved stewardship plan. Plans set out collection systems, consumer accessibility, recovery targets, reporting and public information. Packaging and paper products have been covered for over a decade, along with beverage containers, electronics, batteries, tires, paint, lubricating oil and other products, and the province has added further categories through amendments.
BC's model relies heavily on stewardship agencies, so the practical obligation for most producers is to identify the right agency for each product category, sign a membership agreement and report supply data. Producers that do not join an approved plan must submit their own plan, which is rarely practical. Stewardship agencies typically require members to report sales data periodically, pay fees per unit or per tonne and allow audits, and membership agreements set out what happens if data are late or inaccurate. Producers should review those agreements as carefully as any commercial contract, because they govern a recurring and often growing cost.
Registration, reporting and penalties
Across provinces, the core compliance cycle is similar: identify obligated products, register with the regulator or management body, report quantities supplied (often annually and by material type), pay fees to the producer responsibility organization, and keep records for audit. Mistakes typically arise from underestimating obligated volumes, misclassifying materials, missing products sold online or through affiliates, and failing to register in every province where products are sold.
Enforcement tools include compliance orders, administrative penalties and prosecution. Ontario's RPRA can issue orders and administrative penalties under the RRCEA, and Quebec and BC have their own enforcement regimes. Repeated non-compliance can also damage relationships with retailers, who increasingly require suppliers to confirm EPR compliance. Because federal plastics registry reports cover similar data, inconsistencies between federal and provincial filings can draw attention; see our note on plastics regulation and the Federal Plastics Registry.
Other provinces and harmonization
Ontario, Quebec and British Columbia are not the only provinces with extended producer responsibility. Manitoba, Saskatchewan, Nova Scotia, New Brunswick and others operate programmes for packaging and paper, electronics, tires, used oil and other products, and several have recently adopted or expanded packaging programmes modelled on the larger provinces. The Canadian Council of Ministers of the Environment has long promoted a harmonized approach, but definitions, thresholds, exemptions and fee structures still differ. A national business therefore needs a province-by-province compliance map rather than a single national filing.
Small producer exemptions are a common source of confusion. Most programmes exempt producers below revenue or tonnage thresholds from some or all obligations, but the thresholds differ by province and category, and a business can exceed them in one province while remaining below them in another. Exempt producers may still have to register or report in some regimes, so an exemption should be confirmed rather than assumed.
Fees, eco-modulation and design incentives
Producer responsibility organizations increasingly set fees that vary with the recyclability and environmental profile of materials, often called eco-modulation. Hard-to-recycle formats, such as multilayer laminates, black plastics or packaging with problematic additives, can attract higher fees than readily recyclable materials. This creates a direct financial incentive to redesign packaging, and fee schedules should be reviewed whenever new packaging is developed.
Fee schedules change annually and can increase significantly as programmes expand collection and meet higher recovery targets. Budgeting for extended producer responsibility should therefore include a forecast of fee increases and a review of contract terms that determine whether those increases can be passed on to customers or suppliers. Companies with large packaging footprints often find that a modest redesign, such as switching to a mono-material film or removing a non-recyclable component, produces savings across several provinces at once.
Contracts and supply chain allocation
Extended producer responsibility costs can be material, especially for packaging-intensive businesses, and the obligated party is not always the one best placed to bear them. Supply and distribution agreements should state which party is the producer in each province, who registers and reports, how fees are passed through, what data each party provides and how audits are handled. For cross-border sellers, an agent or distributor in Canada may take on the role, but the arrangement must fit the relevant regulation's definition of producer.
M&A due diligence should include EPR compliance: registrations, reports, fee payments, audit findings and any orders. Historic underreporting can lead to back fees and penalties, and an acquirer will want indemnity protection. Our pages on retail and consumer and environmental and climate law discuss related issues.
Extended producer responsibility checklist
- List every product and packaging type you supply in each province and map it to EPR categories.
- Determine who is the producer under each provincial hierarchy.
- Register with the regulator or management body and join producer responsibility organizations.
- Set up data systems to report quantities by material and province.
- Align EPR reports with federal plastics registry submissions.
- Allocate EPR responsibilities and costs in supply and distribution contracts.
- Review eco-modulated fee schedules each year and factor them into packaging design decisions.
- Confirm any small producer exemption separately in each province and product category.
Related reading: our note on PFAS regulation, which may affect packaging materials.
How TRW & Co helps
We advise brand owners, importers, retailers, e-commerce sellers and investors on extended producer responsibility in Canada. We identify obligated products and producers in each province, review registrations and reporting, draft supply and distribution terms that allocate EPR responsibilities, assess compliance in transactions and respond to audits and enforcement. Where a matter requires a lawyer licensed in a particular province, we work with local counsel. To discuss your obligations, contact us.
Frequently asked questions
Who is the producer under Ontario’s EPR regulations?
Ontario uses a hierarchy that generally starts with the brand holder resident in Canada, then the importer, then the retailer or, for online sales, the marketplace or seller as defined. The details vary by regulation, so each product category should be checked. Contracts can allocate costs, but legal responsibility follows the regulation.
When did Ontario’s blue box transition end?
O. Reg. 391/21 defines the transition period as beginning on 1 July 2023 and ending on 31 December 2025. From 1 January 2026 producers are responsible for the residential blue box system across eligible sources province-wide, including meeting material-specific management targets.
Which containers are covered by Quebec’s deposit system?
Since 1 November 2023 the deposit covers aluminium cans and previously covered containers at 10 cents (25 cents for glass of 500 ml to 2 L). Since 1 March 2025 it covers other ready-to-drink plastic beverage containers of 100 ml to 2 L. From 1 March 2027 it is to cover other formats, including wine and spirits bottles and multilayer cartons.
How does EPR work in British Columbia?
Under the Recycling Regulation, producers of designated products must operate, or belong to an agency that operates, an approved stewardship plan setting out collection, accessibility, recovery targets and reporting. Most producers join an existing stewardship agency for each product category rather than submitting their own plan.
What are the penalties for EPR non-compliance?
Regulators can issue compliance orders, impose administrative penalties and prosecute. In Ontario, the Resource Productivity and Recovery Authority enforces the RRCEA regulations. Quebec and BC have their own regimes. Underreporting can also lead to back fees owed to producer responsibility organizations.
Sources
General information only, not legal advice. References to statutes, courts and authorities describe published law and practice at the date shown.


